Conversion · Land area

Acreage Calculator

Convert a measured area to acres, or calculate one rectangular plot from its length and width. The result also shows square feet, square yards, hectares, square meters, and square miles.

Enter a known land area to see its equivalent in acres and other units.

Land area conversionAcreage describes area, not a fixed lot shape
MEASURED TOTALAdd non-overlapping sections once

Land measurements

The starting value is the exact square-foot equivalent of one acre. Enter your measured total.

For an irregular parcel, add measured non-overlapping sections first, then enter their combined area.

Calculated in your browser.
Land area

1 acres

From 43,560 ft²

Square feet43,560 ft²Equivalent area
Square yards4,840 yd²Equivalent area
Hectares0.40468564 haEquivalent area
Square meters4,046.8564224 m²Equivalent area
Square miles0.0015625 mi²Equivalent area
Calculation43,560 ft² × 0.09290304 = 4,046.8564224 m²; 4,046.8564224 ÷ 4,046.8564224 = 1 acOne acre equals 43,560 ft² on the international-foot basis.

This is a geometric area conversion. It does not establish parcel boundaries or replace a land survey.

A measured area, converted clearly

How do you calculate acreage?

For a rectangular parcel, multiply its length by its width to get square units, then divide square feet by 43,560 to get acres. If you already know the total area, convert that value directly: acres = square feet ÷ 43,560. The calculator keeps the entered measurement visible and converts it without changing the underlying area.

Acreage formula and unit conversions

In U.S. customary measurements, one acre is exactly 43,560 square feet. Divide an area in square feet by 43,560; multiply acres by 43,560 to convert back. A square mile contains 640 acres. Metric conversions use the international foot, defined as exactly 0.3048 meter.

Common area conversionsacres = square feet ÷ 43,5601 acre = 43,560 ft² = 4,840 yd²1 acre = 4,046.8564224 m² = 0.40468564224 ha1 square mile = 640 acres

Area factors square the corresponding length factor: 1 square yard is 9 square feet, and 1 square meter is about 10.7639 square feet. Keep the squared units in the calculation; converting a length factor directly as if it were an area gives the wrong result.

Unit basis: NIST revised unit conversion factors and the NIST definition of the meter and foot. This calculator uses the international foot; legacy U.S. survey-foot records can use a different basis.

Measure land for an acreage estimate

First decide what boundary the area should represent: a whole parcel, one field, a building site, or another portion of land. Use dimensions from a suitable plan or measurements of the area you intend to calculate. Do not substitute a road frontage, listing description, or approximate map outline for a survey when exact boundaries matter.

For one rectangle, record length and width in the same selected unit. If the outline has steps, angles, or curves, split it into simple shapes with no overlap, calculate each shape's area, subtract excluded regions, and add the pieces. Keep the measurements in a consistent unit before summing them.

Worked example: one acre

The calculator starts with 43,560 ft² as an editable arithmetic example. It is exactly one acre and lets you see the equivalent area units; it does not imply that a parcel should have any particular dimensions or shape.

Square feet43,560 ft²
Acres43,560 ÷ 43,560 = 1 ac
Square yards43,560 ÷ 9 = 4,840 yd²
Hectares1 × 0.40468564224 = 0.40468564224 ha
Square meters1 × 4,046.8564224 = 4,046.8564224 m²
Square miles1 ÷ 640 = 0.0015625 mi²

A square with the same area would be about 208.71 ft on each side, but an acre can have many shapes. The area result does not reveal the dimensions, frontage, or boundary location of a parcel.

Calculate an irregular parcel

Divide an irregular outline into rectangles, triangles, or trapezoids that do not overlap. Calculate each section in the same area unit and add the results. For a triangle, use half its base multiplied by its perpendicular height; for a trapezoid, use its length multiplied by the average of its parallel widths. Subtract any excluded region once.

For example, a 100 ft × 200 ft rectangle has 20,000 ft². A triangular extension with an 80 ft base and 50 ft perpendicular height adds 2,000 ft². Together they total 22,000 ft², or 22,000 ÷ 43,560 = 0.50505 acres. Enter that combined area in the measured-area mode.

Follow the detailed irregular-plot measuring guide if you need to organize several sections before using the converter.

What this calculator does not determine

The dimensions mode calculates one rectangle, not an arbitrary boundary. The measured-area mode converts a total you provide; it does not discover that area from a map or legal description. For irregular parcels, measure and sum the sections separately before entering the total.

A conversion cannot establish ownership, acreage for a deed, easements, zoning, buildable area, setbacks, or property lines. Use the appropriate survey, parcel record, or local authority when those details matter. For a historic record expressed in U.S. survey feet, verify which foot definition its source uses before comparing it with a modern measurement.

Acreage calculator FAQs

How many square feet are in an acre?

One acre is 43,560 square feet. Divide square feet by 43,560 to convert to acres.

How many acres are in a square mile?

One square mile contains 640 acres, so divide square miles by 640 to express the same area in acres.

Can I use the calculator for an irregular parcel?

Yes, if you first calculate and add its non-overlapping sections, then enter the combined area. The rectangle mode alone supports only one rectangle.

Does an acre have fixed dimensions?

No. An acre is a unit of area, not a shape. A square acre is about 208.71 feet per side, but land with the same area can have many outlines.

Is an acreage result a property survey?

No. It converts the dimensions or total area entered. It does not identify a parcel boundary or replace a licensed survey when legal boundaries matter.

How do I figure acreage from dimensions?

Multiply length by width to get square feet, then divide by 43,560. For an irregular parcel, split it into non-overlapping shapes and add their areas first.