Length × width × height
How do you calculate cubic feet?
Multiply length, width, and height after putting all three dimensions in the same unit. If each dimension is in feet, the product is cubic feet. If the dimensions use inches, divide each by 12 first, or divide the cubic-inch product by 1,728.
Cubic-foot formula and unit conversions
A rectangular volume is the product of its three perpendicular dimensions. Cubic units matter: changing a length unit changes all three factors, so the conversion factor is cubed.
volume = length × width × height1 ft³ = 1,728 in³1 yd³ = 27 ft³1 ft³ = 0.028316846592 m³ = 28.316846592 LThe calculator uses the international foot, exactly 0.3048 meter. It keeps full conversion precision internally and rounds only the displayed values.
Unit references: NIST Guide to the SI conversion factors and NIST SI units for volume.
Measure a rectangular space
Measure the inside length, width, and height of the box or space represented by the estimate. Use the same unit for each dimension and record whether you measured inside faces, outside faces, or a planned fill boundary.
For a container with a curved wall, sloping side, irregular footprint, or changing depth, split it into shapes the model supports or use a more specific shape calculation. Do not force a single rectangle to represent a space whose dimensions vary significantly.
Worked example: 30 × 36 × 25 inches
Suppose a box measures 30 in by 36 in by 25 in. Convert each dimension to feet, then multiply:
| Length | 30 ÷ 12 = 2.5 ft |
|---|---|
| Width | 36 ÷ 12 = 3 ft |
| Height | 25 ÷ 12 = 2.083333 ft |
| Volume | 2.5 × 3 × 2.083333 = 15.625 ft³ |
| Equivalent cubic yards | 15.625 ÷ 27 = 0.578704 yd³ |
The same result comes from 30 × 36 × 25 = 27,000 in³, then 27,000 ÷ 1,728 = 15.625 ft³.
Turn an area into a volume
An area alone cannot produce cubic feet; it needs a depth or height. For a uniform layer, multiply the measured area by the layer depth after converting both to compatible units. For example, 100 ft² covered to 0.5 ft has 50 ft³ of volume.
For an irregular area, split it into non-overlapping sections, add the areas, and apply the depth to each zone when depths differ. The Bulk Material Calculator is designed for area × depth material estimates and can keep optional bags, density, and price inputs separate.
What this calculator does not model
This calculator reports geometric volume. It does not select material, estimate weight from a density, include compaction or settling, account for voids, or determine package coverage. Those values depend on the product and project conditions; use a sourced product yield or your supplier's specification.
It also does not verify structural capacity, liquid fill safety, building code, or the legal capacity of a container. Treat the output as a unit and geometry calculation, then apply the appropriate project specifications.
Cubic feet calculator FAQs
How many cubic feet are in a cubic yard?
One cubic yard equals 27 cubic feet because 3 feet × 3 feet × 3 feet = 27 cubic feet.
How many cubic inches are in a cubic foot?
One cubic foot equals 1,728 cubic inches because 12 inches × 12 inches × 12 inches = 1,728.
Can I calculate cubic feet from square feet?
Only when you also know the depth or height. Multiply square feet by depth in feet to get cubic feet for a uniform layer.
Can I use different units for length, width, and height?
Convert them to one unit before multiplying. The calculator's dimensions mode changes all three together so the physical dimensions stay consistent.
Does cubic feet tell me how much a material weighs?
No. Weight requires a density for the specific product and conditions. A geometric volume cannot supply that assumption by itself.
How do you calculate cubic feet from dimensions?
Multiply length by width by height after converting all three dimensions to the same unit. If the measurements are in inches, divide the cubic-inch result by 1,728.