Area, Volume & Material Orders · Area & Volume
How to Convert Cubic Yards to Tons
A cubic yard is volume; tons are mass. Multiply by 27 cubic feet and the material density, then divide by 2,000.
Multiply cubic yards by 27 cubic feet per yard and by the material density in pounds per cubic foot, then divide by 2,000 for U.S. short tons.
The guide is paired with the Cubic Yards to Tons Calculator. Use the calculator when you have measurements; use this page to decide what to measure, check the unit basis, and understand what the result does not claim.
The quick answer
Multiply cubic yards by 27 cubic feet per yard and by the material density in pounds per cubic foot, then divide by 2,000 for U.S. short tons. Cubic yards convert to short tons only after a material density is supplied. There is no universal tons-per-yard factor for gravel, soil, asphalt, or concrete.
Use the formula
pounds = yd³ × 27 × density (lb/ft³)
short tons = pounds ÷ 2,000
Keep cubic yards, cubic feet, density, and short tons separate; round the final tonnage only after the material density is confirmed.
Measure and choose the input
Use the Cubic Yards to Tons Calculator after you have a geometric volume. Enter density from the supplier or technical data for the material and condition you are buying.
Start with the material and its supplier density in pounds per cubic foot. Convert cubic yards to 27 cubic feet before multiplying by density.
Worked example
For 5 yd³ at an editable density of 110 lb/ft³, volume is 135 ft³ and mass is 14,850 lb, or 7.425 short tons. A different material or moisture level produces a different answer.
This example uses an entered density to demonstrate the conversion; moisture, gradation, and supplier specifications can change the weight.
Common mistakes
There is no universal “tons per yard” number for gravel, soil, sand, stone, or mulch. Moisture, particle size, compaction, and the supplier’s basis can move the result.
Divide the calculated pounds by 2,000 for short tons, then divide by the same density to return to cubic yards.
What this estimate leaves out
The page uses U.S. short tons, not metric tonnes. It does not estimate delivery payload, compaction, minimum loads, or the appropriate material for a project.
FAQs
How many tons are in one cubic yard?
It depends on density. Use 27 × density ÷ 2,000.
Does this use metric tonnes?
No. The result is a U.S. short ton of 2,000 pounds.
Why does my supplier quote differ?
Check density basis, moisture, compaction, and whether the quote rounds to a truckload.