Area, Volume & Material Orders · Temperature & Conversion

How to Convert Fahrenheit, Celsius, and Kelvin

Temperature scales use both a factor and an offset. The calculator validates absolute zero instead of treating temperature like a simple linear unit.

Use the scale-specific formula: °C = (°F − 32) × 5/9, °F = °C × 9/5 + 32, and K = °C + 273.15.

The guide is paired with the Temperature Conversion Calculator. Use the calculator when you have measurements; use this page to decide what to measure, check the unit basis, and understand what the result does not claim.

The quick answer

Use the scale-specific formula: °C = (°F − 32) × 5/9, °F = °C × 9/5 + 32, and K = °C + 273.15. Temperature conversion uses both a scale factor and an offset: Celsius and Fahrenheit are not interchangeable by multiplication alone.

Use the formula

C = (F − 32) × 5 ÷ 9
F = C × 9 ÷ 5 + 32
K = C + 273.15

Keep the offset and factor in the formula, and delay rounding because a rounded temperature can shift a Fahrenheit or Kelvin result.

Measure and choose the input

The Temperature Conversion Calculator keeps the selected source and target scale visible. Kelvin cannot be below 0 K; Celsius and Fahrenheit have corresponding absolute-zero limits.

Identify the source scale first and use the matching conversion. State whether a temperature is an absolute reading or a change in temperature.

Worked example

Convert 72°F to Celsius: (72 − 32) × 5/9 = 22.2222°C. Convert that result to Kelvin by adding 273.15, giving about 295.3722 K.

This example converts a temperature reading; a 10-degree change uses the scale factor without the same fixed offset as a reading.

Common mistakes

Do not use a simple multiply-only factor because Fahrenheit and Celsius have different zero points. Also distinguish temperature from heat energy and from a rate of change.

Convert the result back to the original scale to confirm the offset and factor were applied in the right order.

What this estimate leaves out

This converts scale readings. It does not model heat transfer, weather forecasts, cooking safety, or material performance.

FAQs

What is 0°C in Fahrenheit?

0°C equals 32°F.

Can Kelvin be negative?

No. Absolute zero is 0 K; the calculator rejects lower values.

Why is Fahrenheit not just Celsius times a factor?

The scales have different zero points, so the 32-degree offset is part of the formula.