Area, Volume & Material Orders · Area & Volume
How Much Does a Yard of Mulch Weigh? Dry, Wet, and Bagged
There is no single weight for a yard of mulch. Learn how material, moisture, and compaction change the number, and how to convert a supplier's density into pounds or tons.
A cubic yard of mulch does not have one fixed weight. One supplier's published ranges put dry wood mulch at roughly 400–800 lb per cubic yard, with wet material often above 1,000 lb. The number that matters for an order is the bulk density for the exact product and condition.
A cubic yard is a volume: 27 cubic feet. Weight depends on what fills that volume and how much water it holds. That is why two loads with the same volume can weigh very different amounts.
If you already know the area and depth, the Bulk Material Calculator will calculate the volume. Use the supplier's density only when you need a weight or a tonnage conversion.
The short answer
For a quick planning range, dry wood mulch commonly falls in the hundreds of pounds per cubic yard, and wet mulch can be substantially heavier. A supplier's published guide gives these ranges:
- dry shredded hardwood: about 500–700 lb/yd³
- dry cedar: about 400–600 lb/yd³
- dry pine bark nuggets: about 350–500 lb/yd³
- compost or leaf mulch: about 600–1,000 lb/yd³ dry, and 1,000–1,400+ lb/yd³ wet
Those are one supplier's ranges, not a national standard. Product, region, age, particle size, and moisture all change the number. Ask your supplier for the density or weight of the material you are buying.
Why a cubic yard does not have one weight
Moisture is the biggest variable. Organic mulch absorbs water. A load that left the supplier dry can gain significant weight after rain or after being watered. The same yard of shredded hardwood can move from a few hundred pounds to near or above 1,000 lb when saturated.
Material matters. Rubber mulch is dense and does not absorb water, so its weight is relatively stable. Straw is light when dry. Compost and leaf mulch can be denser than bark. Pine bark nuggets are lighter than shredded hardwood.
Particle size and compaction matter. Fine, shredded material packs more material into a cubic yard than large nuggets. A load that has settled or been compressed can weigh more than the same volume after it is fluffed.
Fresh versus aged material matters. Freshly processed mulch can carry more moisture than material that has been stored and turned. Do not assume a number from one delivery applies to the next.
Published ranges by mulch type
The table below reproduces ranges published by one mulch supplier. It is useful for planning, but it is not a substitute for the supplier's current product data.
| Mulch type | Dry (lb/yd³) | Wet (lb/yd³) |
|---|---|---|
| Shredded hardwood | 500–700 | 800–1,000+ |
| Cedar | 400–600 | 700–900 |
| Pine bark nuggets | 350–500 | 600–800 |
| Rubber mulch | 800–1,200 | 800–1,200 |
| Compost / leaf mulch | 600–1,000 | 1,000–1,400+ |
| Straw | 350–500 | 900–1,400+ |
Source: Best Bark Mulch, “How Much Does a Yard of Mulch Weigh?” (supplier guide, last updated April 23, 2026; checked October 20, 2026). Treat the ranges as examples from one supplier, not as universal constants.
Convert volume to weight
The calculation is:
Weight = volume in cubic yards × bulk density in pounds per cubic yard
If the supplier gives density in pounds per cubic foot, convert it first:
lb/yd³ = lb/ft³ × 27
The Bulk Material Calculator's density field accepts lb/ft³ or kg/m³. If your supplier quotes lb/yd³, divide by 27 before entering it in the lb/ft³ field. If the supplier quotes kg/m³, enter it directly in the kg/m³ field.
Then multiply by the number of cubic yards.
Example 1: one yard at 550 lb/yd³
1 × 550 = 550 lb.
At 900 lb/yd³, the same yard is 900 lb. The volume did not change; the moisture and material did.
Example 2: three yards
3 × 550 = 1,650 lb (about 0.83 short tons).
3 × 900 = 2,700 lb (about 1.35 short tons).
Example 3: the supplier quotes 30 lb/ft³
30 × 27 = 810 lb/yd³.
Two yards: 2 × 810 = 1,620 lb.
Keep the density and volume separate in your notes. If you change the density assumption, the volume should not change.
Bags, tons, and supplier quotes
Bagged mulch is sold by volume, usually 2 or 3 cubic feet per bag. The bag's printed weight is the easiest weight source; do not infer it from a generic density if the label already gives a weight.
How many 2 ft³ bags are in a cubic yard?
A 2 ft³ bag is 2 ÷ 27 = about 0.074 yd³. One cubic yard therefore needs 27 ÷ 2 = 13.5 bags, rounded up to 14 bags.
If each bag is labeled 40 lb, 14 bags weigh about 560 lb. If each is 50 lb, the same 14 bags weigh about 700 lb. The bag count is the same; the weight comes from the package label.
Converting to tons:
- 1 U.S. short ton = 2,000 lb
- 1 metric tonne = 1,000 kg, or about 2,204.6 lb
At 550 lb/yd³, one yard is 550 ÷ 2,000 = 0.275 short tons. At 900 lb/yd³, it is 0.45 short tons.
If a supplier quotes by the ton, ask whether the price uses short tons or metric tonnes, and ask for the density or conversion they used. A quote in tons is not comparable to a quote in cubic yards until both are on the same basis. To convert yards of mulch to tons, divide the total pounds by 2,000 for short tons. When a supplier lists mulch weight per yard, confirm whether the figure is for dry, delivered, or saturated material; the cubic yard of mulch weight can change with the moisture basis.
What it means for a truck or trailer
Weight matters most when you haul the material yourself. A cubic yard of dry mulch may be manageable in a small trailer; the same volume wet can exceed the trailer's rating.
Check the payload rating inside the driver's door jamb, not the towing rating. Subtract the weight of passengers, fuel, tools, and any other cargo. If the calculated mulch weight is close to the remaining payload, use delivery or split the load.
For multiple yards, do the multiplication before you leave:
- 2 yd³ at 550 lb/yd³ = 1,100 lb
- 2 yd³ at 900 lb/yd³ = 1,800 lb
- 3 yd³ at 550 lb/yd³ = 1,650 lb
- 3 yd³ at 900 lb/yd³ = 2,700 lb
A half-ton pickup does not have 1,000 lb of available payload once passengers and gear are included. The door-jamb rating is the controlling number.
What this estimate does not tell you
This page explains the relationship between volume, density, and weight. It does not:
- certify a supplier's scale or truck weight;
- provide a universal density for every mulch product;
- account for actual moisture at the time of delivery;
- determine whether a vehicle is safe to load;
- replace the supplier's product data or a scale ticket.
If the weight is important for a permit, a bridge, a trailer, or a vehicle limit, use the supplier's measured weight or a certified scale. Do not rely on a generic range for a safety-critical load.
Volume and bag-size reference: Iowa State University Extension, “How to Determine the Amount of Mulch Needed for a Garden Bed” (last reviewed July 2026; checked October 20, 2026). It uses 2- and 3-cubic-foot bags as common examples and confirms that bag sizes vary.
FAQs
How much does a yard of mulch weigh?
There is no single answer. Dry wood mulch commonly falls in the hundreds of pounds per cubic yard; one supplier's published ranges are roughly 400–800 lb/yd³ for dry wood mulch, with wet material often above 1,000 lb. Use the density for the exact product and moisture condition.
Why is wet mulch heavier?
Organic mulch absorbs water. Water adds mass without adding much volume, so the same cubic yard can weigh substantially more after rain or irrigation. Rubber mulch is the main exception because it does not absorb water.
How many pounds is 2 cubic feet of mulch?
It depends on the bulk density. A 2 ft³ bag is about 0.074 cubic yards. At 550 lb/yd³, the mulch alone weighs about 41 lb; at 800 lb/yd³, about 59 lb. Use the weight printed on the bag when it is available.
How many 2 cubic foot bags are in a yard of mulch?
27 ÷ 2 = 13.5, so plan for 14 bags for one cubic yard by volume. The bag count does not change with weight; the total weight does.
Is a yard of mulch a ton?
Not necessarily. One cubic yard at 550 lb/yd³ is 0.275 short tons; at 900 lb/yd³ it is 0.45 short tons. A short ton is 2,000 lb, so you need the density to convert volume to tons.
Can I haul a yard of mulch in a pickup?
Check the payload rating in the driver's door jamb and subtract passengers, fuel, and cargo. A dry yard may fit within the rating; a wet yard may not. When the calculated weight is close to the limit, deliver or split the load.