Bills, Percentages & Everyday Math · Time & Everyday
How to Add and Subtract Hours and Minutes
Time uses base 60: 60 minutes make an hour and 60 seconds make a minute. Normalize the units before carrying, borrowing, or comparing a result.
To add or subtract clock durations, line up hours, minutes, and seconds, then carry or borrow whenever a unit reaches 60. The Time Calculator performs those base-60 steps and returns a normalized result.
Remember the base-60 rule
Time is not decimal notation:
60 seconds = 1 minute
60 minutes = 1 hour
So 1:45 means 1 hour 45 minutes, not 1.45 hours. Convert minutes to decimal hours only by dividing by 60.
Add hours, minutes, and seconds
Add each column, then carry groups of 60. For 2 h 48 min 35 s + 1 h 27 min 40 s:
seconds: 35 + 40 = 75 s = 1 min 15 s
minutes: 48 + 27 + 1 = 76 min = 1 h 16 min
hours: 2 + 1 + 1 = 4 h
result: 4 h 16 min 15 s
The carry is part of the calculation; do not leave 75 seconds or 76 minutes in a final normalized result.
Borrow when subtracting
If a lower unit is too small, borrow from the next unit. For 5 h 10 min − 2 h 35 min, borrow one hour as 60 minutes:
5 h 10 min = 4 h 70 min
4 h 70 min − 2 h 35 min = 2 h 35 min
The same idea applies when seconds are short: borrow one minute as 60 seconds. If you are subtracting clock times rather than durations, use the Time Duration Calculator and make the overnight convention explicit.
Keep decimal hours separate
Convert 4 h 30 min to decimal hours as 4 + 30/60 = 4.5 h. Do not read .30 as thirty hundredths of an hour. This distinction matters for timesheets and cost rates, although the calculator itself only performs the arithmetic you enter and does not decide payroll rounding.
Check the day boundary
Adding a duration to a clock time may pass midnight. Add the duration in minutes or seconds, then report the next date when the total reaches 24 hours. The time calculator is a duration arithmetic tool; it does not apply time zones, daylight-saving rules, or calendar holidays.
FAQs
How do I add 45 minutes to 2:30?
2 h 30 min + 45 min = 3 h 15 min. The 75 minutes normalize to 1 hour 15 minutes.
How do I subtract 35 minutes from 5:10?
Borrow one hour: 4 h 70 min − 35 min = 4 h 35 min.
Is 2:30 equal to 2.30 hours?
No. 2:30 is 2 hours 30 minutes, which is 2.5 decimal hours.
Does the time calculator know the date after midnight?
It can normalize the duration, but a calendar date or timezone rule is a separate input. Use a date/time method when the day boundary affects the result.