Bills, Percentages & Everyday Math · Travel & Everyday
How to Calculate MPG From a Fill-Up
Divide miles driven by the gallons that replace the fuel burned. A full-to-full fill-up makes the gallons and miles describe the same interval.
To calculate MPG, divide the miles driven by the U.S. gallons used over the same interval. The MPG Calculator also shows gallons per 100 miles and optional cost per mile, which can be easier to compare across vehicles.
Use the full-to-full method
Start with a full tank, record the odometer or trip miles, drive normally, and fill the tank again. The gallons added at the second full fill represent the fuel burned since the first full fill. A partial tank at either end breaks that relationship because the pump amount no longer matches the interval's fuel use.
Apply the MPG formula
MPG = miles driven ÷ U.S. gallons used
If the fill-up record is in liters, convert to U.S. gallons before using the formula. One U.S. gallon is approximately 3.785411784 liters; an imperial gallon is different. Do not enter liters in a U.S.-gallon field.
Work through a 300-mile fill-up
Suppose the trip meter shows 300 miles and the full-to-full refill adds 10 gallons:
MPG = 300 ÷ 10 = 30.0 MPG
At a price of $3.50 per gallon, the same interval costs $35.00 and costs $3.50 ÷ 30 = $0.1167 per mile. Cost is an optional calculation; it does not change the MPG result.
Read gallons per 100 miles
The inverse form is:
gallons per 100 miles = 100 ÷ MPG
At 30 MPG, the vehicle uses about 3.33 gallons per 100 miles. This measure adds more directly across distances than MPG: a lower gallons-per-100-miles value means less fuel used for the same distance.
Reduce one-tank noise
Traffic, weather, load, tire pressure, speed, and the percentage of city driving can move one tank's result. For a steadier personal figure, add miles and gallons from several consecutive full-to-full intervals and divide the totals once. Do not average the individual MPG values unless each interval should have equal weight regardless of gallons used.
FAQs
What is the MPG formula?
MPG = miles driven ÷ U.S. gallons used. The miles and gallons must describe the same full-to-full interval.
Why is my MPG lower than the sticker?
The sticker uses a test-cycle estimate. Real traffic, cold starts, hills, speed, load, air conditioning, and tire pressure can produce a different result.
Can I calculate MPG from a partial fill-up?
Only if the fuel level was known to be the same at the start and end. A standard partial fill does not tell you how much fuel was burned, so full-to-full is safer.
Is a higher MPG always the best comparison?
MPG is useful, but gallons per 100 miles shows the fuel saved over a fixed distance more directly. Compare both when two vehicles have very different MPG ratings.