Bills, Percentages & Everyday Math · Percentages & Fractions

How to Find a Percentage of a Percentage

A share of a share is not the sum of the two percentages. Here is the rule, a table of worked examples, and the questions where adding is the right move.

To find a percentage of a percentage, multiply the two percentages and divide by 100. Twenty percent of fifty percent is (20 × 50) ÷ 100 = 10 percent. When both percentages are below 100%, the answer is smaller than either one, because the second percentage is taken from the first percentage's slice, not from the whole.

The Percentage Calculator does the multiplication for you. Choose "What is P% of V?", enter 50 as the value and 20 as the percent, and the result is 10. The calculator labels the result as a plain number because it treats 50 as a number; when the 50 stands for 50% of a whole, the 10 stands for 10% of that whole.

The rule

A percent is a fraction over 100, and the word "of" means multiply. Applying one percent to another multiplies two such fractions:

a% of b% = (a ÷ 100) × (b ÷ 100) of the whole
        = (a × b) ÷ 10,000 of the whole
        = (a × b) ÷ 100 as a percent of the whole

For 20% of 50%, both routes give the same result:

  • Decimal route: 20% = 0.20 and 50% = 0.50, so 0.20 × 0.50 = 0.10, which is 10%.
  • Percent route: (20 × 50) ÷ 100 = 1,000 ÷ 100 = 10%.

The result is a percent of the original whole, so you divide by 100 once to get back into percent form. Dividing by 10,000 would give the decimal 0.10; multiplying that decimal by 100 gives 10%.

The size check is useful. Half of a whole is 50%. Twenty percent of that half is one fifth of the half, which is 10% of the whole. When both percentages are below 100%, an answer larger than the smaller of the two is a warning sign; percentages above 100% break that rule legitimately, because they represent more than a whole.

Worked examples

QuestionMultiplicationAnswer
20% of 50%20 × 50 ÷ 10010%
15% of 40%15 × 40 ÷ 1006%
25% of 80%25 × 80 ÷ 10020%
12% of 6.5%12 × 6.5 ÷ 1000.78%
50% of 50%50 × 50 ÷ 10025%
50% of 20%50 × 20 ÷ 10010%

15% of 40% in full. Convert both to decimals: 0.15 and 0.40. Multiply: 0.15 × 0.40 = 0.06. Multiply by 100 to state it as a percent: 6%. Check it on a real amount: 40% of $250 is $100, and 15% of $100 is $15. Fifteen dollars is 6% of $250, so the two-step result checks out.

12% of 6.5%. Here the second percentage is already small, so the answer is small: 12 × 6.5 = 78, and 78 ÷ 100 = 0.78%. If a 6.5% fee carries a 12% surcharge on the fee, the surcharge is 0.78% of the amount the fee was based on.

Three percentages. Multiply all three and divide by 100 twice, which is the same as dividing by 10,000:

a% of b% of c% = (a × b × c) ÷ 10,000 as a percent

Fifty percent of fifty percent of fifty percent is (50 × 50 × 50) ÷ 10,000 = 12.5%. Each step halves the amount: 50%, then 25%, then 12.5%.

Where a share of a share shows up

The arithmetic is the same whatever the labels are. These are four cases where multiplying two percentages answers the actual question:

  • A subgroup of a subgroup. Sixty percent of adults use an app, and 30% of those users pay for the premium tier. The share of all adults who pay is 60% × 30% = 18%. It would be wrong to say 90% or 30%.
  • A portion of a portion of stock. Forty percent of the inventory is on clearance, and 25% of the clearance stock is marked final sale. Final-sale items are 40% × 25% = 10% of the inventory.
  • Tax on a discounted price. A $100 item is 20% off, so it sells for $80. An 8% sales tax adds $6.40. That tax is 8% of 80% = 6.4% of the original $100, and the customer pays 86.4% of the original price. The tax applies to the discounted price, so it is 8% of 80%, not 8% of the original price.
  • A tip on a discounted bill. A 20% tip on the $80 discounted subtotal is $16, which is 16% of the original $100. The tip rate applies to the amount actually owed, not to the pre-discount price.

In each case, the second percentage is applied to a quantity that has already been reduced by the first. That is what makes the result multiplicative rather than additive.

When adding is correct: percentage points

Two percentages can also be compared by subtraction, but that answers a different question. A percentage point is the arithmetic difference between two rates; a percent of a percent is a share of a share.

If a rate moves from 6.0% to 7.5%, the change is 1.5 percentage points. The relative change is (7.5 − 6.0) ÷ 6.0 × 100 = 25%. Both statements describe the same move: the rate gained 1.5 points, which is a 25% increase over its starting level.

Starting rateNew ratePoint changeRelative change
6.0%7.5%+1.5 points+25%
5.0%7.0%+2.0 points+40%
8.0%6.0%−2.0 points−25%

Adding is correct when you are comparing two rates measured against the same base, such as two tax rates or two interest rates. Multiplying is correct when one percentage is applied to a quantity that is itself a percentage. A headline that says a rate rose "2%" is ambiguous: it can mean 2 percentage points or a 2% relative rise, and the two are very different.

Successive percentage changes

A percentage change is also a multiplication, with a direction. A 20% increase multiplies by 1.20; a 20% decrease multiplies by 0.80. Chaining changes means multiplying the multipliers:

final = start × (1 + r1) × (1 + r2) × ...
combined change = (1 + r1) × (1 + r2) × ... − 1
  • +20% then +10%: 1.20 × 1.10 = 1.32, so the combined change is +32%, not +30%.
  • +20% then −20%: 1.20 × 0.80 = 0.96, so the combined change is −4%, not zero.
  • 25% off then 10% off: 0.75 × 0.90 = 0.675, so the combined discount is 32.5%, not 35%.
  • Two 20% discounts: 0.80 × 0.80 = 0.64, so the combined discount is 36%, not 40%.

The 20% decrease in the second example subtracts more dollars than the 20% increase added, because it is 20% of a larger number. This is the same reason a 20% raise followed by a 20% pay cut does not restore the original pay. To check a single discount step, the Discount Calculator shows the paid share and the effective percent off.

Common mistakes

  1. Adding the percentages. 20% + 50% = 70% is not 20% of 50%. The second percentage applies to the 50% slice. The correct answer is 10%.
  2. Forgetting the division by 100. Multiplying 20 × 50 gives 1,000, which is not a percentage. Divide by 100 to return to percent form, or multiply 0.20 × 0.50 to stay in decimal form.
  3. Mixing decimal and percent forms inside one calculation. The decimal 0.10 and the percent 10% are the same number written two ways. Writing 0.20 × 50 = 10 is correct if the 10 is labeled as a percent; writing 0.20 × 0.50 = 0.10 is correct if the 0.10 is labeled as a decimal. Mixing the two produces an answer that is off by a factor of 100.
  4. Rounding before the last step. One third of one third is 1/9 = 11.111...%. Using 33.33% for each third gives 11.108889%, which is close but not exact. Keep fractions when the answer has to be exact, and round only the final displayed value.

A fifth mistake is choosing the wrong operation. If the question is "how much did the rate move", subtract and report percentage points. If the question is "what share of the whole does this represent", multiply. The Percentage Difference Calculator handles a third question again: the symmetric difference between two values using their average as the base.

FAQs

What is 20% of 50%?

10%. Multiply 20 × 50 = 1,000 and divide by 100, or multiply 0.20 × 0.50 = 0.10 and convert to 10%.

Is 20% of 50% the same as 50% of 20%?

Yes. Both equal 10% of the whole, because multiplication is commutative. What is not the same is a 20% increase and a 20% decrease, which use different bases.

What is 30% of 60%?

18%. The multiplication is 30 × 60 ÷ 100 = 18. In a survey, that would mean 18% of the full group.

Why is 20% of 50% not 70%?

Because the 20% is not taken from the whole. It is taken from the 50% slice, and 20% of half is a tenth of the whole. Adding the percentages would treat the second percentage as if it applied to the original total.

What is 50% of 50% of 50%?

12.5%. Three successive halvings take 100% to 50%, then 25%, then 12.5%.

How do I calculate 15% of 40%?

6%. Multiply 0.15 by 0.40 to get 0.06, then multiply by 100 to state it as a percent.

Does the Percentage Calculator have a percent-of-percent mode?

No. Use the "What is P% of V?" mode and enter the first percentage as the value and the second as the percent. The result is the percent of the whole, provided you treat the value you entered as a percentage. The calculator's other two modes answer different questions: a part as a percent of a whole, and a percent change between two values.