Bills, Percentages & Everyday Math · Percentages & Fractions
Percent Increase vs. Percent Change: What Is the Difference?
Percent increase is the positive case of percent change. Both use the original value as the base; percentage points and percentage difference answer different questions.
Percent increase is percent change when the new value is larger than the original. Use
(new − original) ÷ original × 100. The same formula gives a negative result for a decrease; percentage points and percentage difference use different bases.
The Percentage Calculator handles the starting value, new value, and increase/decrease result. This guide focuses on choosing the correct comparison and naming the result accurately when a value is a rate, a price, or a measurement.
The short answer
Percent increase and percent change are usually the same arithmetic when the original value is the baseline:
percent change = (new − original) ÷ original × 100
percent increase = percent change when new > original
percent decrease = the positive magnitude of percent change when new < original
The order matters. The original value is the denominator, so reversing the two values changes the percentage. A statement such as “from 80 to 100” contains a direction; a comparison with no natural before-and-after order may need percentage difference instead.
Put the formulas side by side
Use old for the baseline and new for the later value:
| Question | Formula | What the sign means |
|---|---|---|
| Percent change | (new − old) ÷ old × 100 | Positive increase; negative decrease |
| Percent increase | (new − old) ÷ old × 100 | Use when new is greater than old |
| Percent decrease | (old − new) ÷ old × 100 | Report as a positive decrease amount |
For a 20-unit movement, the denominator decides the answer. Moving from 80 to 100 uses 80 as the base; moving from 100 to 80 uses 100. The absolute difference is the same, but the relative comparison is not.
Work through increases and decreases
From 80 to 100
The change is 100 − 80 = 20. Divide by the original 80: 20 ÷ 80 = 0.25. Multiply by 100, so the percent change is +25%. Because the new value is larger, it is also a 25% increase.
From 100 to 80
The change is 80 − 100 = −20. Divide by the original 100: −20 ÷ 100 = −0.20. The signed percent change is −20%, which is commonly described as a 20% decrease. It is not a 25% decrease because the baseline has changed.
A price change
A price moves from $45 to $54. The difference is $9. 9 ÷ 45 × 100 = 20%, so the price increased by 20%. To reverse the calculation, multiply the original by 1 + 0.20: $45 × 1.20 = $54.
Keep currency rounding at the display or billing step. If the original price was stored to more than two decimals, calculate from that value before rounding the displayed price.
Do not confuse percent with percentage points
Percentage points compare the numbers themselves when both values are already percentages. If a survey share rises from 40% to 50%, the difference is 10 percentage points. Relative to the original 40%, the percent increase is:
(50% − 40%) ÷ 40% × 100 = 25%
“Up 10 percentage points” and “up 25%” are both valid, but they answer different questions. Use percentage points for a direct rate gap; use percent change when you want the relative movement from the old rate.
Reverse the result and check the limits
If you know the original and an increase rate p, calculate the new value as:
new = old × (1 + p)
If you know the new value after an increase and want the original, divide:
old = new ÷ (1 + p)
For a decrease rate p, use new = old × (1 − p) and old = new ÷ (1 − p). Do not subtract the percentage from the final price to reverse a discount; the base is different.
Percent change is undefined when the original value is zero. Negative baselines can make “increase” language confusing even though the signed formula can still be evaluated. State the baseline and the sign when the data crosses zero or represents a signed measurement.
Keep percentage difference separate
When neither value is a before or after, use the symmetric percentage-difference formula instead:
percentage difference = |A − B| ÷ (|A + B| ÷ 2) × 100
The Percentage Difference Calculator uses the average as the base, so swapping the values does not change the result. The guide Percentage Difference vs Percentage Change explains that distinction with the same 80 and 100 example.
FAQs
Is percent increase the same as percent change?
It uses the same formula when the new value is higher and the original value is the baseline. “Percent change” also covers a decrease and keeps the negative sign.
Why is 80 to 100 a 25% increase but 100 to 80 a 20% decrease?
The first calculation divides by 80; the second divides by 100. Percent change is relative to the starting value, not just the size of the gap.
What is the difference between 10% and 10 percentage points?
Ten percentage points is a direct change between percentage values. A 10% relative increase multiplies the original percentage by 1.10. The two results coincide only in special cases.
Can I calculate a percent change from zero?
No. Division by the original value would require dividing by zero. Report the absolute change or choose a different, meaningful baseline.