Two tasks, one proportion
How to use the ratio calculator
Pick Simplify to reduce a ratio to its smallest whole-number terms, or Scale to multiply both terms by a factor. Enter A and B in the same order as the ratio is written. Simplify opens with 16 and 12, which reduces to 4 : 3. Scale uses the same terms with a factor of 2.5, which produces 40 : 30.
Results update as you type, the page URL keeps the current values, and Reset returns to the examples. Both terms must be greater than zero. Simplify mode accepts whole numbers only; scale mode accepts decimals. The result keeps the ratio separate from the decimal A ÷ B so the two are not mistaken for each other.
Ratio notation and what A : B means
A ratio compares two quantities in order. A : B means A of the first quantity for every B of the second. It can also be written A to B or as the quotient A / B. Order matters: 16 : 12 is not the same comparison as 12 : 16.
Equivalent ratios describe the same comparison at different counts. 16 : 12, 4 : 3, and 40 : 30 all have the same quotient, 1.333…, because multiplying or dividing both terms by the same nonzero number leaves the proportion unchanged.
A ratio does not fix the absolute amounts. 4 : 3 could mean 4 cups to 3 cups or 400 parts to 300 parts. It also does not attach units: when the terms use different units, the pair is a rate such as 60 miles : 1 hour, not a unitless ratio.
Simplify a ratio with the greatest common divisor
Simplifying divides both terms by their greatest common divisor (GCD), the largest whole number that divides A and B exactly. For 16 and 12 the common divisors are 1, 2, and 4, so the GCD is 4. Dividing both terms gives 16 ÷ 4 = 4 and 12 ÷ 4 = 3, or 4 : 3. When the GCD is 1, the ratio is already in lowest terms.
d = gcd(A, B)A : B = (A ÷ d) : (B ÷ d)Whole-number terms are required because the GCD is defined for integers. To reduce a decimal pair, first multiply both terms by the same power of ten: 1.5 : 2 becomes 15 : 20, which reduces to 3 : 4. If you only need a scaled pair and not the reduced form, use scale mode.
Scale a ratio by a factor
Scaling multiplies both terms by the same positive factor k. With a factor of 2.5, 16 : 12 becomes 16 × 2.5 : 12 × 2.5 = 40 : 30. The proportion is unchanged, but the terms describe larger counts. A factor between 0 and 1 scales the ratio down, and a factor of 1 leaves it unchanged.
scaled A = A × kscaled B = B × kA : B × k = (A × k) : (B × k)The calculator rejects zero and negative factors. Multiplying by zero collapses both terms to 0 : 0, which has no defined quotient, and a negative factor reverses the sign of both terms instead of preserving a positive comparison.
A scaled pair is not automatically reduced. 40 : 30 still has a common factor of 10 and reduces to 4 : 3 in simplify mode. Scaling answers what the new terms are; simplifying answers what the smallest whole-number pair is. You can confirm that scaling preserved the proportion by cross-multiplying: 16 × 30 = 480 and 12 × 40 = 480.
Worked examples
The first two examples use the same starting ratio so the difference between the modes is visible.
| Simplify 16 : 12 | GCD 4 → 4 : 3; A ÷ B = 1.3333333 |
|---|---|
| Scale 16 : 12 by 2.5 | 16 × 2.5 = 40, 12 × 2.5 = 30 → 40 : 30 |
| Simplify the scaled result | GCD 10 → 40 : 30 = 4 : 3 |
| Double a 3 : 2 recipe | 3 × 2 = 6, 2 × 2 = 4 → 6 : 4, still 3 : 2 when reduced |
In the first row, 4 is the largest number that divides both terms. In the second, both terms are multiplied by 2.5, so the quotient stays the same. The third row shows why a scaled pair may need simplifying if the goal is lowest terms. The recipe example is the same arithmetic: doubling a two-part mix doubles both parts and leaves the proportion unchanged.
Decimal terms and units
Scale mode accepts decimals for A, B, and the factor, and keeps the entered values while calculating. Simplify mode needs whole numbers, so rewrite a decimal ratio with a common power of ten first. 0.75 : 1.5 has at most two decimal places; multiply both terms by 100 to get 75 : 150, then divide by 75 to get 1 : 2.
Units are handled before the ratio, not inside it. 16 inches : 12 inches is 4 : 3 because the shared unit cancels. 16 inches : 12 feet is not 4 : 3; convert the feet to inches first, giving 16 : 144, which reduces to 1 : 9. The calculator does not convert or infer units. If a measurement is a fractional inch reading, the Inches to Feet Calculator converts it to decimal feet first.
The decimal shown for A ÷ B is rounded for display, while simplified whole-number terms are exact. A repeating decimal such as 1.333… does not make the ratio approximate; the quotient repeats, but the comparison is exact.
What a ratio does not tell you
A ratio is not a percentage. 4 : 3 does not mean 4 out of 7, and it does not mean 133.3% unless you deliberately express the quotient as a percentage. 4 out of 7 is 4 ÷ (4 + 3) = 57.1%, a part-to-whole share that is valid only when both terms are parts of one total. A gear ratio, an odds statement, or a mix ratio may not describe a total at all.
- It does not solve a proportion with a missing term, such as 3 : 4 = x : 12.
- It does not divide a quantity in a given ratio or turn a ratio into a percentage.
- It compares two terms; a three-part ratio such as 1 : 2 : 3 needs a different calculation and is not reduced here.
- It does not convert units, currencies, or measurements, or check whether a mix ratio is suitable.
- It requires positive terms; zero and negative values are outside this tool's model.
For a recipe, paint mix, or other product, confirm the ratio and the units in the manufacturer's instructions. This page performs arithmetic on the numbers you enter; it does not choose or approve a mixing ratio.
Ratio calculator FAQs
What is the difference between simplifying and scaling a ratio?
Simplifying divides both terms by their greatest common divisor and returns the lowest whole-number pair. Scaling multiplies both terms by a factor you choose and returns a new pair that may still have common factors. Both preserve the proportion, but only simplifying guarantees lowest terms.
Can a ratio include decimals?
Yes; a ratio can compare decimal quantities, and scale mode accepts them directly. Simplify mode requires whole numbers because the GCD is an integer operation. To reduce a decimal ratio, multiply both terms by the same power of ten first; 1.5 : 2 becomes 15 : 20 and then 3 : 4.
Does 4 : 3 mean 4 out of 7 or 133%?
Neither unless you add an interpretation. 4 : 3 compares two quantities. It becomes 4 out of 7 only when the terms are parts of one whole, in which case the shares are 4/7 and 3/7. The quotient 4 ÷ 3 = 1.333… is not a percentage; it becomes 133.3% only if you choose to express that quotient as a percentage. The calculator labels the decimal as A ÷ B for that reason. If you need a percentage of a whole, use the Percentage Calculator instead.
Can I use it to double a recipe or mix?
Yes for a two-term ratio with the same units. A 3 : 2 recipe doubled is 6 : 4, which reduces back to 3 : 2; enter 3, 2, and a factor of 2. For a mix with three components, or terms in different units, convert the units first and use a calculation that covers every term; this tool only reduces or scales two.