Construction · Concrete
How Bag Yield Changes a Fence-Post Concrete Estimate
Two concrete bags with different stated yields can produce different purchase counts for the same post hole. Compare yield before comparing prices.
The same concrete volume can require different bag counts because package yield varies. Compare each product using its stated cubic-foot yield, then round the package count up.
Use the Fence Post Concrete Calculator for hole geometry and a first bag estimate. This article focuses on comparing package yields and unit cost after the required volume is known, rather than repeating the calculator's full hole-measurement method.
The short answer
First calculate the net volume that must be filled. Then compare products using each package's stated yield in the same volume unit. Bag weight alone does not tell you the yield, and a lower price per bag is not necessarily a lower cost per cubic foot. Round the final package count upward only after applying any separately justified allowance.
Start with net fill volume
Use the calculator or project measurement to determine how much concrete the hole requires after accounting for any post displacement supported by actual dimensions. The package comparison requires one net volume in cubic feet. Keep this as a separate quantity from the bag label yield; a bag's weight is not its finished volume.
Compare package yield and price
For each package, calculate the unrounded bag requirement and cost per cubic foot:
bags before purchase rounding = net concrete volume (ft³) ÷ package yield (ft³/bag)
unit cost = bag price ÷ package yield (ft³/bag)
purchase bags = ceiling(net concrete volume ÷ package yield)
Check that the yield and price refer to the same bag size and mix. Compare total purchase cost only after rounding each product to whole bags; cost per cubic foot alone does not account for a leftover partial bag.
Worked example: one post hole
Assume a 12-inch diameter hole, 30 inches of concrete depth, and a 4-inch by 4-inch post embedded through that depth.
hole volume = π × 6² × 30 = 3,393.5 in³
post volume = 4 × 4 × 30 = 480 in³
net volume = 3,393.5 − 480 = 2,913.5 in³
net volume = 2,913.5 ÷ 1,728 = 1.686 ft³
The base geometric estimate is approximately 1.69 ft³ for this hole and these assumptions. It is not yet a bag count.
Worked product comparison
For the example net volume of 1.686 ft³, consider two hypothetical package yields. The figures below illustrate the arithmetic only; check the current bag label and local price.
Product A: yield 0.60 ft³, price $6.00
bags = ceiling(1.686 ÷ 0.60) = 3
cost per ft³ = $6.00 ÷ 0.60 = $10.00
purchase total = 3 × $6.00 = $18.00
Product B: yield 0.375 ft³, price $4.00
bags = ceiling(1.686 ÷ 0.375) = 5
cost per ft³ = $4.00 ÷ 0.375 = $10.67
purchase total = 5 × $4.00 = $20.00
A lower shelf price per bag does not necessarily mean a lower cost for the amount needed. These are hypothetical prices, not market data. If package yields differ, compare usable volume and the rounded purchase total, then include any separately justified allowance.
Estimate limits and next steps
This arithmetic does not determine post size, footing size, frost depth, wind resistance, reinforcement, placement method, curing, or local fence requirements. Those depend on the project and applicable rules. The result is a quantity estimate, not structural or legal advice.
For the general cylindrical volume method, see how to calculate concrete for a round column. That Guide explains the shape; this Blog post focuses on post-hole measurement and product yield.
FAQs
Do I subtract the post from the hole volume?
Subtract it when its embedded dimensions are known and the calculation supports that input. Otherwise show gross hole volume and label the estimate accordingly.
Why can bag counts differ between calculators?
Check hole dimensions, post displacement, bag yield, allowance, and rounding. Different assumptions can produce different but internally consistent results.
Can I use bag weight to calculate volume?
Not by itself. Weight requires density to infer volume. For packaged concrete, the manufacturer's stated yield is the direct input for estimating bag count.
Is three bags enough for every 12-inch hole?
No. Depth, post size, product yield, and any justified allowance all affect the result.
Sources and calculation basis
Cylinder and rectangular-prism formulas are geometric relationships. Bag yield is product-specific and must come from the current manufacturer label or technical data for the chosen mix. For a manufacturer example of packaged concrete product information, see QUIKRETE Concrete Mix; verify the current label for the exact bag and yield before purchasing. Checked 2026-10-22.