Construction · Concrete
How Much Does a Cubic Yard of Concrete Weigh?
A cubic yard is 27 cubic feet. Multiply by concrete density to estimate pounds, then distinguish a material estimate from a truck or structural limit.
One cubic yard equals 27 cubic feet. Multiply 27 by the density in pounds per cubic foot to estimate its weight.
The Concrete Weight Calculator performs the conversion when you enter a volume and density. This article answers the narrower practical question behind the search: what does one yard mean as a mass estimate, and what should you verify before using it for a delivery or load discussion?
The short answer
There is no single weight for every concrete mix. If the entered density is 145 lb/ft³:
1 yd³ × 27 ft³/yd³ × 145 lb/ft³ = 3,915 lb.
That is 1.9575 U.S. short tons before display rounding. It is a calculated mass estimate based on the chosen density, not a universal truck capacity or engineering limit.
Start with the unit basis
Keep these quantities separate:
- Volume: one cubic yard is exactly 27 cubic feet.
- Density: pounds per cubic foot belongs to the particular mix and condition.
- Mass: volume multiplied by density produces pounds.
- Short tons: pounds divided by 2,000; this is not a metric tonne.
If a supplier provides density in kilograms per cubic meter, first convert it to pounds per cubic foot: 1 kg/m³ ≈ 0.062428 lb/ft³. Then multiply by 27 ft³ for one cubic yard. Keep the density condition attached to the value; do not combine a wet density with an unlabeled dry-volume assumption.
Worked example: one cubic yard
Assume a normal-weight concrete estimate uses 145 lb/ft³:
volume = 1 yd³ × 27 = 27 ft³ mass = 27 ft³ × 145 lb/ft³ = 3,915 lb short tons = 3,915 ÷ 2,000 = 1.9575 short tons
For display, you might show 3,915 lb or about 1.96 short tons. Keep the unrounded value for further calculations. At 150 lb/ft³, the same volume would be 4,050 lb, so changing the density changes the result by 135 lb per yard.
Why the answer changes
Aggregate type, entrained air, moisture, and mix design affect density. A lightweight mix can be materially lighter than a normal-weight mix; a heavyweight mix can be heavier. Use the current supplier or technical-data value for the mix being considered, not a remembered universal “weight per yard” rule.
For a larger pour, multiply the actual volume by the same density. For example, 5 yd³ at 145 lb/ft³ is 5 × 27 × 145 = 19,575 lb, or 9.7875 short tons. Do not round each yard before multiplying.
What the number does not approve
This estimate does not select concrete strength, determine reinforcement, approve a form or foundation, establish a truck’s legal payload, or replace supplier delivery requirements. Confirm vehicle, jurisdiction, access, and supplier constraints directly.
For the general density formula, see the Concrete Weight Guide. For another mass conversion, use the Cubic Yards to Tons Calculator.
FAQs
Is one cubic yard always about two tons?
No. At 145 lb/ft³ it is 1.9575 short tons, but the result changes with density. “About two tons” is a rough description, not a safe load input.
Does a 60-pound bag weigh 60 pounds after mixing?
The package label describes the dry product. Finished concrete mass also includes added water and depends on formulation. Use the manufacturer’s yield and product information for bag calculations.
Should I use pounds or tons?
Use the unit that matches the decision. State whether “ton” means a U.S. short ton.