Room paint, calculated
How much paint do I need for a room?
Measure the room length, width, and wall height. The calculator finds the four-wall area, subtracts the door and window openings you enter, then adds an optional ceiling. Multiply the paintable area by the number of coats and divide by the product's coverage per gallon. The exact amount depends on the paint label and the surface, so coverage is editable rather than treated as a fixed property of all paint.
Formula used by the paint calculator
For a rectangular room with the same wall height on all four sides, opposite wall pairs have areas 2 × length × height and 2 × width × height. Door and window areas are deducted once per opening. If selected, the ceiling adds the room footprint once.
Gross wall area = 2 × (room length + room width) × wall heightNet wall area = gross wall area − door area − window area − other openingsOptional ceiling and paintPaintable area = net wall area + (room length × room width, if included)Gallons needed = paintable area × coats ÷ coverage per gallonMeasurements are converted to square feet internally when you use meters, then results are displayed in the selected area unit. The gallons calculation keeps fractional values; whole gallons are shown separately as a planning figure.
Measure the room and openings consistently
This model assumes a rectangular room and one common wall height. Measure inside length and width between the walls, and measure wall height from the finished floor to the ceiling. Enter each door or window size once with the number of openings that share that size. If the room has several window sizes, enter one size group in the window fields and put the measured area of the other openings in “Other opening area.” You can also enter the combined area there and set the count of the standard group to zero. Do not count the same opening twice.
The ceiling is not included by default. Turn it on only if the same paint and coverage apply to that surface. If you are painting trim, closet interiors, alcoves, or a sloped ceiling, measure those surfaces separately; they are not represented by the rectangular-room model.
Door, window, and additional opening areas are subtracted from wall area. Very large openings that exceed the entered gross wall area are rejected, rather than producing a negative paintable wall result.
Worked example: walls in a 12 ft × 10 ft room
Use an 8 ft wall height, one 3 ft × 7 ft door, two 3 ft × 4 ft windows, two coats, and editable coverage of 350 ft² per gallon. The calculator excludes the ceiling in this example, matching its default setting.
| Gross wall area | 2 × (12 + 10) × 8 = 352 ft² |
|---|---|
| Door and window area | (3 × 7) + 2 × (3 × 4) + 0 = 45 ft² |
| Net wall area | 352 − 45 = 307 ft² |
| Area across two coats | 307 × 2 = 614 ft² |
| Paint quantity | 614 ÷ 350 = 1.7543 gallons |
| Whole gallons for planning | 2 gallons |
If the ceiling is included, its 12 × 10 = 120 ft² is added once. That changes total paintable area to 427 ft² and the two-coat estimate to 854 ÷ 350 = 2.44 gallons, or 3 whole gallons when rounding up to gallon-sized cans.
Common room paint examples
These examples use 350 ft² per gallon, two coats unless stated otherwise, and no ceiling unless the row says to include it. Product coverage varies, so replace the example coverage with the value on your paint label.
| Common question | Example inputs | Calculated answer |
|---|---|---|
| How much paint for a 10 ft × 10 ft room? | 8 ft walls · no openings · 2 coats | 640 ft² across coats · 1.83 gal · 2 whole gallons |
| How much paint for a 12 ft × 10 ft room? | 8 ft walls · 1 door · 2 windows · 2 coats | 614 ft² across coats · 1.75 gal · 2 whole gallons |
| How much paint for a 12 ft × 12 ft room with ceiling? | 8 ft walls · ceiling included · 2 coats | 1,056 ft² across coats · 3.02 gal · 4 whole gallons |
| How much paint for a 12 ft × 12 ft room with one coat? | 8 ft walls · walls only · 1 coat | 384 ft² across coats · 1.10 gal · 2 whole gallons |
| How much paint for 1,000 ft² of surface? | 2 coats · 350 ft² per gallon | 2,000 ft² across coats · 5.71 gal · 6 whole gallons |
Answers to common paint coverage questions
Searches such as how much paint to paint a room, how much paint, and how many gallons paint for square feet need paintable area, coats, coverage per gallon, and the container size you plan to buy. Enter the room dimensions and openings, then replace the editable coverage with the value on your product label.
| Question | Calculator answer |
|---|---|
| How much paint to paint a room? | Calculate wall area, subtract openings, multiply by coats, and divide by coverage. |
| How much coverage in a gallon of paint? | Use the exact label value; 350–400 ft² per gallon is only a common range. |
| How many square feet will 1 gallon of paint cover? | One coat covers the entered coverage; two coats require twice the area. |
| How much does 5 gallon paint cover? | Multiply the label coverage by 5 for one coat, then adjust for the surface. |
| How much paint does a quart cover? | As a planning estimate, divide gallon coverage by 4 and check the can. |
| How much paint do I need for a 10x10 room? | Enter 10 ft × 10 ft, wall height, openings, coats, and coverage; the ceiling changes the result. |
Use the paint label for coverage and coat requirements
Sherwin-Williams says a gallon typically covers about 350–400 ft², while noting that product requirements vary with application method, surface type, and condition. This calculator starts at the lower end, 350 ft² per gallon, as an editable example. The stated range is not a guarantee for every paint, wall, primer, or application. Replace the starting value with the coverage for the exact product and surface.
Source checked October 20, 2026: Sherwin-Williams Paint Calculator guidance.
Coats multiply the paintable area; they do not change the wall dimensions. Follow the product label for the number of coats, dry time, primer, and surface preparation. The calculator does not add extra material for rough or porous surfaces, so use a lower coverage value if the manufacturer's guidance calls for it.
What this paint estimate does not include
The tool models four rectangular walls and, optionally, one flat ceiling. It does not estimate trim, doors or windows painted as surfaces, closets, stairwells, vaulted ceilings, multiple wall heights, textured finish adjustments, primer, spills, touch-ups, or leftover inventory. Add those areas separately or adjust coverage to match the product and surface guidance.
The fractional gallon result is the calculated amount under the entered assumptions. The whole-gallon figure simply rounds that quantity up to one-gallon increments; paint is also sold in other container sizes, so compare the estimate with the sizes available for the product you choose. It is a material estimate, not a price quote or guarantee that every drop will be used.
Paint calculator FAQs
How many gallons of paint do I need for a 12 × 10 room?
Wall height, openings, number of coats, and paint coverage affect the answer. With 8 ft walls, one 3 × 7 ft door, two 3 × 4 ft windows, two coats, and 350 ft² per gallon, the wall-only example is 1.7543 gallons, or 2 whole gallons when rounded up.
Does the paint estimate include the ceiling?
No. The ceiling is off by default. Select “Include the ceiling” to add one room footprint to the paintable area; this assumes a flat rectangular ceiling with the same paint coverage.
Should I subtract doors and windows from wall area?
For paint applied only to the walls, subtract openings that will not receive that paint. If you are painting a door or window trim with the same product, estimate those surfaces separately instead of including them in the opening deduction.
How many square feet does one gallon cover?
Coverage depends on the exact product, surface, and application. Sherwin-Williams gives 350–400 ft² as a typical range and advises checking product-specific requirements. Use the can or technical sheet value in the editable coverage field.
Why does the calculator show fractional gallons and whole gallons?
Fractional gallons show the formula result. Whole gallons are a separate planning amount rounded up to the next gallon; actual paint can sizes vary by product.