Construction · Area measurement

Square Footage Calculator

Calculate square footage for rectangular, triangular, or circular areas and add matching sections together.

Calculator inputs

Calculated in your browser.
Result

120 ft²

Total square footage

Square meters11.148365 m²
Square yards13.333333 yd²
Areas counted1
Formulatotal ft² = length × width × area-unit factor × countSplit an irregular floor into non-overlapping shapes. This page calculates area only; material coverage and waste belong to the material tool.

Use the result with the units shown

Square Footage Calculator: what it calculates

Measure each supported area in the same unit, choose the shape, and enter how many identical areas to include. Irregular spaces should be split into non-overlapping sections and added.

Formula and inputs

The calculator converts the finished area after applying the shape formula. It keeps square feet, square meters, and square yards as separate area units.

Calculation modelrectangle = length × widthtriangle = base × height ÷ 2circle = π × radius²1 m² = 10.7639104167 ft²

Worked example: 12 ft × 10 ft

Area12 × 10 = 120 ft²
Square meters120 × 0.09290304 = 11.1484 m²

For a room with an alcove, split the plan into rectangles that do not overlap. Use the total area as the input to a flooring, paint, or bulk-material tool when needed.

Limits and assumptions

This page does not estimate coverage, waste, price, finished living area under a property standard, or structural dimensions.

Square Footage Calculator FAQs

How do I measure an irregular room?

Divide it into rectangles or other supported shapes, calculate each section, and add the sections without counting any area twice.

How do you figure out square footage?

Multiply each rectangle's length by its width, calculate other supported shapes with their formula, and add the non-overlapping results. Convert to square feet after the shape calculations if you measured in meters.

Is square footage the same as feet?

No. Feet measure length; square feet measure area, so both dimensions contribute to the result.

Can I enter meters and feet in the same area?

Not within one shape. Convert every measurement to the same unit before multiplying; the unit selector applies to the whole shape.