Construction · Stair planning

Stair Calculator

Estimate riser count, actual riser height, tread count, and total run from an entered stair rise.

Calculator inputs

in
in
in
Calculated in your browser.
Result

13 risers

Estimated riser count

Actual riser height7.384615 in
Tread count12
Total run120 in
Formularisers = ceil(total rise ÷ target riser); actual rise = total rise ÷ risersThis is early arithmetic planning. Local stair codes, landings, nosings, handrails, and structure require separate review.

Use the result with the units shown

Stair Calculator: what it calculates

Enter the total rise and a target riser height. The calculator rounds the riser count up, recalculates the actual rise, and uses your tread depth for the total run.

Formula and inputs

The model exposes its counting convention: a straight flight with one fewer tread than risers. It does not choose a code-compliant target size.

Calculation modelrisers = ceil(total rise ÷ target riser)actual riser = total rise ÷ riserstreads = risers − 1total run = treads × tread depth

Worked example: 96 in rise and 7.5 in target

Riser countceil(96 ÷ 7.5) = 13
Actual riser96 ÷ 13 = 7.3846 in
Run with 10 in treads12 × 10 = 120 in

Use the result for early layout arithmetic, then check the applicable authority and a detailed plan before construction.

Limits and assumptions

No local code, landing, nosing, handrail, headroom, stringer, or structural requirement is selected or verified.

Stair Calculator FAQs

Why does the calculator round risers up?

Risers must be whole steps in this model. Rounding up keeps the actual riser at or below the target input.

Does the top landing count as a tread?

No. The displayed convention is treads = risers − 1 for one straight flight.

Can I use this result as approval for a stair design?

No. This is a geometric planning estimate. Safety, comfort, and code requirements need separate review.