Conversion · Lumber volume

Board Feet Calculator

Calculate board feet from lumber thickness, width, length, and number of boards, with the cubic-inch equivalent shown.

Board-foot model

Board feet measure lumber volume: thickness in inches × width in inches × length in feet ÷ 12, multiplied by the number of pieces.

Lumber dimensions

in
Nominal or actual thickness, in inches.
in
Board width, in inches.
ft
Board length, in feet.
boards
Number of boards with these dimensions.

Board feet are a volume convention. They are not the same as linear feet or the number of boards.

Calculated in your browser.
Lumber volume

40 bd ft

Total for 10 boards

Each board4 bd ftOne piece
Total volume5,760 in³Equivalent cubic volume
Board-foot basis144 in³1 board foot
Calculation1 in × 6 in × 8 ft × 10 ÷ 12 = 40 board feet1 board foot = 144 cubic inches.

Use the lumber seller's stated nominal or actual dimensions consistently. This result does not estimate price, grade, shrinkage, or usable yield.

Convert with the units shown

How do you calculate board feet?

Multiply thickness in inches by width in inches by length in feet, then divide by 12. Multiply by the number of boards for a total.

Formula and unit basis

A board foot is a lumber-volume unit equal to a board 1 inch thick, 12 inches wide, and 1 foot long. The calculator keeps thickness and width in inches and length in feet so the standard ÷12 formula is visible.

Conversion rulesboard feet per board = thickness (in) × width (in) × length (ft) ÷ 12total board feet = board feet per board × number of boards1 board foot = 144 in³

Unit reference: NIST Guide to the SI conversion factors.

Worked example: ten 1 × 6 × 8 boards

Each board1 in × 6 in × 8 ft ÷ 12 = 4 board feet
Piece count10 boards
Total40 board feet

The same total is 5,760 cubic inches ÷ 144 cubic inches per board foot. Use the dimensions stated by the seller consistently; nominal and actual lumber sizes can differ.

Board feet are volume, not a purchase quote

This calculator reports nominal or entered lumber volume. It does not choose a grade, account for defects or usable yield, estimate price, add saw kerf, or decide how much extra stock a project needs. Ask the supplier which dimensions and pricing basis apply.

Board Feet Calculator FAQs

What is one board foot?

One board foot is 144 cubic inches, equivalent to a board 1 inch thick, 12 inches wide, and 1 foot long.

How many board feet are in a 2 × 6 × 8 board?

Using the entered dimensions, 2 × 6 × 8 ÷ 12 = 8 board feet.

Should I use nominal or actual lumber dimensions?

Use the dimension basis required by the supplier or estimate, and apply it consistently to every board. Nominal and actual sizes are not interchangeable.

How do you figure board feet?

Multiply thickness in inches by width in inches and length in feet, divide by 12, then multiply by the number of boards.