Everyday life · Dates & planning

Date Calculator

Count the days or weekdays between two dates, or add and subtract years, months, weeks, and days from a starting date, including a quick way to find the date 50 weeks later. The result shows the calendar breakdown, inclusive-day option, and month-end rule used.

Choose days between two dates, or add/subtract calendar units from one date.

Dates

The earlier date in the interval.
The later date. The end date is not counted unless you include it below.
Choose whether the end date itself counts as one day.
Weekdays count Monday through Friday. U.S. federal holidays are not excluded.

Dates are calendar dates, not times. The calculator does not use time zones, daylight saving changes, or a time of day.

Calculated in your browser.
Duration

30 days

Oct 20, 2026 → Nov 19, 2026

Calendar days30End day excluded
Weekdays22Mon–Fri only
Weeks + days4wk 2dAt 7 days per week
Calendar breakdown0yr 0mo 30dFull months, then days
CalculationNov 19, 2026 − Oct 20, 2026 = 30 daysThe end date is not counted as an extra day.Weekdays (Mon–Fri): 22The calendar breakdown describes the actual interval before any inclusive-day adjustment.

Weekdays exclude Saturday and Sunday. Federal holidays are not excluded, so this is not a payroll or official business-day count.

A calendar date, not a timestamp

How the date calculator counts days

The calculator treats each input as a calendar date at midnight UTC. That keeps the arithmetic free of local time zones and daylight-saving changes: a date-only count should not change because a clock moves forward or back.

For two dates, the basic count is the later date minus the earlier date. The result also separates the interval into full years, full months, and remaining days. Full months are counted first; the remaining days are measured from the last full-month anchor to the end date.

Day countdays = end date − start dateinclusive days = days + 1 when the end date is includedcalendar breakdown = full years, full months, remaining days

The calculator opens with an editable example: October 20, 2026 to November 19, 2026. That is 30 calendar days, or 0 years, 0 months, and 30 days. It is one day short of a full month because October 20 plus one month is November 20.

Include or exclude the end date

The gap between two dates does not normally count the end date. October 20 to October 21 is one day if you count the elapsed interval, but two dates are involved if you include both endpoints. The "Include end date" option adds one day to the calendar-day total and to the weekday count.

Use the inclusive option for questions such as "how many days does this event cover?" when both the first and last day count. Leave it off for an elapsed-time question such as "how many days until the deadline?" The calendar years/months/days breakdown stays tied to the actual interval, so the inclusive adjustment is visible rather than hidden inside the month math.

If the start and end dates are the same, the exclusive count is 0 days and the inclusive count is 1 day. A weekend day still counts as one calendar day, but not as a weekday.

Weekdays and business days

The weekday count includes Monday through Friday and excludes Saturday and Sunday. It is useful for a rough working-day span, but it is not an official business-day count: U.S. federal holidays, state holidays, company shutdowns, and other non-working days are not excluded.

For the default example, October 20 to November 19, 2026 contains 22 weekdays. Including November 19 adds one weekday, for 23. The exact number depends on the dates and on whether the end date is included.

If you need a holiday-aware count, use an official holiday calendar for the relevant jurisdiction and subtract those dates separately. This calculator does not maintain a holiday table and does not present a weekday count as a payroll, leave, or legal deadline calculation.

Add or subtract dates

The second mode moves a starting date by whole years, months, weeks, and days. Years and months are applied first, then weeks and days. Use the operation menu to move forward or backward; negative unit entries are not needed.

For example, October 20, 2026 plus one month is November 20, 2026. October 20, 2026 plus 90 days is January 18, 2027. The result panel shows the weekday and the signed number of days from the start date, so you can check the direction and the size of the shift.

The order matters when a month end is involved. Adding one month to January 31 gives February 28 (or February 29 in a leap year), because February does not have a 31st. The calculator keeps the day where possible and clamps to the target month's last day; it does not silently roll into March.

How to calculate a date 50 weeks after another date

Fifty weeks is a fixed interval of 350 calendar days. Because 50 is a whole number of weeks, the result falls on the same weekday as the starting date. In the calculator, choose Add or subtract from a date, enter the starting date, set Weeks to 50, and leave the other units at zero.

50-week calculation50 weeks = 50 × 7 = 350 calendar daysresult date = starting date + 350 days

For example, January 1, 2026 plus 50 weeks is December 17, 2026. This is a calendar-date calculation; it does not add a time of day, time zone, holidays, or a business-day rule.

Month-end and leap-day rules

Calendar months have different lengths, so a years/months/days difference can have more than one reasonable reading. This calculator uses one documented rule: count full months by adding months to the start date, keeping the day where possible and clamping at the target month's end. Then count the remaining days.

For example, February 28 to March 31 is one month and three days under this rule: February 28 plus one month is March 28, and March 28 to March 31 is three days. Other tools may choose a different month-end convention; the rule used here is stated so the result can be checked.

Leap day follows the same clamping rule. February 29, 2024 plus one year is February 28, 2025. February 29, 2024 to February 28, 2025 is one year under this calculator. If a particular contract or policy defines a different anniversary rule, use that rule instead of treating this result as legal advice.

What the calculator does not do

  • It does not add a time of day, time zone, or daylight-saving offset.
  • It does not exclude holidays or maintain a jurisdiction-specific holiday table.
  • It does not add or subtract a number of business days; only the weekday count is provided.
  • It does not determine legal deadlines, notice periods, payroll dates, or eligibility ages.
  • It supports dates from 1900 through 2100 and rejects results outside that range.

For age specifically, the Age Calculator uses the same date-only arithmetic and adds a next-birthday countdown.

Date calculator FAQs

Does the date calculator include the end date?

Only if you choose "Yes — include the end day." The default counts the gap between the dates and treats the end date as the endpoint, not an extra day.

Are holidays excluded from the weekday count?

No. Monday through Friday are counted and weekends are excluded, but federal, state, and company holidays are not. Subtract those separately from an official calendar if you need a holiday-aware business-day count.

Why does January 31 plus one month show February 28?

February does not have a 31st. The calculator keeps the day where possible and clamps to the last day of the target month. In a leap year, the same calculation produces February 29.

Can I calculate age with this tool?

The days-between mode gives the interval, but the dedicated Age Calculator also shows years, months, days, total days, and the next birthday.

What date is 50 weeks after a starting date?

Add 350 calendar days to the starting date. The calculator accepts 50 weeks directly and shows the resulting date and weekday.