Dates, Age & Deadlines · Dates & Everyday
How to Count Business Days Between Two Dates
Business days are weekdays minus the holidays your organization observes. Here is how to count them by hand, with two worked windows and the calendar choice that changes the answer.
A business day is a Monday-to-Friday day that is not a holiday the relevant organization observes. To count business days between two dates, count the weekdays first, then subtract the holidays that fall inside the window on a weekday. The second step is where counts commonly go wrong, because a holiday is not always observed on its calendar date.
The Date Calculator returns the calendar-day and weekday count for any two dates. It deliberately does not subtract holidays, so use its weekday result as the starting number and finish the holiday step below.
What counts as a business day
There is no single national definition. A business day is whatever the governing calendar says it is: a federal employee's schedule, a bank's operating calendar, a court's rules, a school term, or a clause in a contract. The common core is a Monday-to-Friday workday, but the holidays differ between those calendars.
Two terms are worth keeping apart:
- Weekday: Monday through Friday. Weekends are excluded; holidays are not.
- Business day: a weekday that the chosen calendar does not observe as a holiday.
Businesses that operate seven days a week, such as retail or logistics, may use a different definition entirely. When a deadline matters, find the definition in the document that created it instead of assuming the federal list applies.
For federal employees, 5 U.S.C. 6103 establishes the holidays, and the U.S. Office of Personnel Management publishes the dates and the observed-date rules on its Federal Holidays page. The rule that matters for counting is this: when a holiday falls on a Saturday or Sunday, federal employees on a Monday-to-Friday schedule usually observe it on the preceding Friday or the following Monday, respectively. The observed date, not the calendar date, is the day that leaves the count.
Count the weekdays first
For a window of a few weeks, count the calendar days, take out the weekends, and then handle holidays. For a longer window, use full weeks:
weekdays = (full weeks × 5) + weekdays in the leftover days
The leftover days start on the same weekday as the start date, because each full week returns you to that weekday.
Worked window: October 20 to November 19, 2026. The start is a Tuesday and the end is a Thursday. Counting the gap without the end date gives 30 calendar days. Thirty days is four full weeks plus two days, so the four full weeks contribute 20 weekdays. The two leftover days are Tuesday and Wednesday, both weekdays. The weekday count is 22.
If both endpoint dates count, add the end date: 31 calendar days and 23 weekdays. The Date Calculator lets you choose that inclusive count; the arithmetic changes by exactly one day, not by a rounding convention.
| Window | Calendar days | Full weeks | Leftover days | Weekdays |
|---|---|---|---|---|
| Tue Oct 20 to Thu Nov 19, 2026 (end excluded) | 30 | 4 | Tue, Wed | 22 |
| Tue Oct 20 to Thu Nov 19, 2026 (end included) | 31 | 4 | Tue, Wed, Thu | 23 |
| Fri Oct 23 to Sat Oct 31, 2026 (end excluded) | 8 | 1 | Fri | 6 |
The third row shows why the leftover weekdays need checking. Eight days is one full week plus one day, and the leftover day is a Friday, so the count is 5 + 1 = 6. If the leftover day were a Saturday, it would add nothing.
A common check is that a weekday count comes out close to five sevenths of the calendar days. Thirty days gives about 21.4 by that rough ratio, and the exact count of 22 is consistent with where the weekends fall.
Subtract only the holidays that apply
From the weekday count, subtract each holiday that satisfies both conditions:
- It is observed by the calendar you chose.
- Its observed date is a weekday inside the counted window.
A holiday that falls on a Saturday is not subtracted from a Saturday, because Saturday was never in the weekday count. What matters is whether the calendar observes it on a nearby weekday that is inside the window.
Example: Independence Day 2026. July 4, 2026 is a Saturday. For federal employees on a Monday-to-Friday schedule, the holiday is usually observed on Friday, July 3, 2026. For the window July 1 through July 8, 2026, inclusive, the weekdays are July 1, 2, 3, 6, 7, and 8: six weekdays. Subtracting the observed holiday gives five business days on the federal calendar.
The same date shows why the calendar choice matters. The Federal Reserve's Holidays Observed (K.8) states that when a holiday falls on a Saturday, Reserve Banks are open the preceding Friday, while the Board of Governors is closed. An institution following that operating schedule may treat Friday, July 3, 2026 as a working day. The arithmetic is the same; the holiday list is not.
Example: Veterans Day 2026. The window October 20 to November 19, 2026 contains 22 weekdays, and November 11, 2026 is a Wednesday. On a calendar that observes Veterans Day, the business-day count is 21. On a calendar that does not, it stays 22.
Two errors are easy to make here. Subtracting a holiday that already fell on a weekend double-counts the exclusion, because the weekend was never counted. Subtracting a holiday that falls outside the window shifts the count in the wrong direction. List the holidays in the window first, verify their observed dates, and subtract once.
Count forward to a deadline
Counting forward needs a starting convention. Take a notice received on Monday, November 23, 2026, with a deadline of 10 business days and the receipt day treated as day 0. Thanksgiving, Thursday, November 26, 2026, is a federal holiday.
| Business day | Date | Note |
|---|---|---|
| 1 | Tue, Nov 24, 2026 | |
| 2 | Wed, Nov 25, 2026 | |
| — | Thu, Nov 26, 2026 | Thanksgiving, skipped |
| 3 | Fri, Nov 27, 2026 | |
| 4 | Mon, Nov 30, 2026 | |
| 5 | Tue, Dec 1, 2026 | |
| 6 | Wed, Dec 2, 2026 | |
| 7 | Thu, Dec 3, 2026 | |
| 8 | Fri, Dec 4, 2026 | |
| 9 | Mon, Dec 7, 2026 | |
| 10 | Tue, Dec 8, 2026 | Deadline |
The tenth business day is Tuesday, December 8, 2026. If the notice day itself counts as day 1, the same ten business days end on Monday, December 7, 2026. The one-day difference comes from the convention, not from the arithmetic, so write down which convention you used.
Ten business days is two business weeks only when no holiday interrupts them. Here, Thanksgiving pushes the deadline one weekday later. The same logic applies to a window ending near Christmas, New Year's Day, or any other observed holiday.
Start day, end day, and partial days
Contract and policy language usually decides these questions, and the wording is not always explicit:
- "Within 10 business days after receipt." The day of receipt is commonly treated as day 0, so counting starts on the next business day. Confirm this in the document rather than assuming it.
- "From" a date. This can include or exclude the named date depending on the drafting convention. A one-day disagreement is enough to miss a deadline.
- A document received late in the day. Some rules treat anything received after a stated closing time as received on the next business day. That moves the whole count.
- A deadline that lands on a weekend or holiday. Many rules roll it to the next business day, but not all do. The roll-forward is a rule, not an arithmetic consequence.
- Early closures and unscheduled closures. The day before a holiday, weather closures, and company shutdowns are not in the federal holiday list. If they affect your organization, add them to the list explicitly.
For the underlying calendar-day and weekday conventions, including inclusive counts and month-end date shifts, see How to Count Days Between Dates. That guide covers the date arithmetic; this one adds the holiday step.
Choose the right calendar
Match the calendar to the deadline, not to habit:
- Federal employees and federal offices: OPM's Federal Holidays page. Use the observed dates and check the current year.
- Banks and payment processing: the Federal Reserve's K.8 schedule and its Financial Services holiday page. The Saturday rule can differ from the federal observance, as the July 3, 2026 example shows.
- State and local government: the state's own holiday schedule. States can observe dates that are not on the federal list.
- Schools: the district calendar, which includes breaks that are not holidays.
- Shipping and delivery: the carrier's service calendar, which may treat some holidays as pickup-only or delivery-only days.
- Contracts and workplace policies: the definition in the document or handbook wins over any general calendar.
Do not mix lists. A federal holiday that your company works is not a day off for your count, and a company shutdown is not a federal holiday. Pick one calendar, state it, and apply it consistently.
Sources checked October 20, 2026: U.S. Office of Personnel Management, Federal Holidays (5 U.S.C. 6103; observed-date rule); Board of Governors of the Federal Reserve System, Holidays Observed — K.8 (2026–2030 schedule). Dates are examples for 2026 and should be rechecked against the current year's official schedule.
Check the count
Three checks catch most errors:
- Recount the weekdays. Multiply full weeks by five, then add the leftover weekdays. If the total is not close to five sevenths of the calendar days, the window or the endpoints are wrong.
- List the holidays in the window. For each one, write the observed date and confirm it is a weekday inside the window. Subtract it once.
- Reverse the count. From the deadline, count the business days backward using the same holiday list. You should land on the start date, or on the day after it if the start date was excluded.
A result that is one day off usually means the start or end date was counted differently, not that the holiday list was wrong. A result that is several days off usually means a holiday was missed or subtracted on the wrong date.
FAQs
Are business days Monday through Friday?
That is the usual definition, but confirm it. Retail, logistics, and shift-based businesses may work weekends, and some organizations treat Saturday as a business day.
Does 10 business days mean two weeks?
Usually about 14 calendar days, but a holiday inside the window pushes the deadline later. Counting the day after Monday, November 23, 2026 as day 1, the tenth business day is Tuesday, December 8, 2026 because of Thanksgiving; without a holiday it would be Monday, December 7.
Are weekends counted as business days?
No, under the standard Monday-to-Friday definition. A weekend day is not counted even when a holiday falls on it.
Do federal holidays always reduce a business-day count?
Only if the calendar you are using observes them. July 4, 2026 falls on a Saturday and is usually observed on Friday, July 3 for federal employees, while the Federal Reserve's schedule says Reserve Banks are open that Friday. The holiday list changes the answer, so name the calendar.
Is the day I receive a notice counted?
Often it is treated as day 0, with counting starting the next business day, but the document controls. Check the exact wording before relying on either convention.
How do I count business days between two dates quickly?
Use the Date Calculator for the weekday count, list the observed holidays inside the window, and subtract them. Then confirm whether the start and end dates count.
What if a holiday falls on a Saturday?
Do not subtract the Saturday, because it was not in the weekday count. Check whether the holiday is observed on a nearby weekday, and subtract that date only if it falls inside the window.