Area, Volume & Material Orders · Volume & Conversion
How to Calculate Cubic Feet from Dimensions
Convert every dimension to the same unit, multiply the three measurements, and keep the cubic units visible through the final conversion.
To calculate cubic feet for a rectangular space, convert the length, width, and height to feet, then multiply them: volume in ft³ = length in ft × width in ft × height in ft. If you already have cubic inches, divide by 1,728. The Cubic Feet Calculator handles the unit conversion and shows equivalent cubic yards, cubic meters, liters, and cubic inches.
This is a geometry and unit-conversion method. It does not estimate the weight or product coverage of soil, gravel, concrete, water, or another material without a separate product specification.
Use the cubic-foot formula
For a rectangular box, multiply the three perpendicular dimensions. When all three are in feet, the result is cubic feet. A cubic foot is the volume of a 1 ft × 1 ft × 1 ft cube. Cubic units show that three dimensions were multiplied; do not use a square-foot result as if it were a volume.
Useful exact relationships include:
- 1 cubic yard = 27 cubic feet, because 3³ = 27.
- 1 cubic foot = 1,728 cubic inches, because 12³ = 1,728.
- 1 cubic foot = 0.028316846592 cubic meters.
- 1 cubic foot = 28.316846592 liters.
The volume factors used here follow NIST's conversion tables. The SI unit of volume is the cubic meter, and a liter is a cubic decimeter. See NIST's volume conversion factors and NIST's SI volume guide.
Put every dimension in one unit
Convert before multiplying when the measurements use inches, feet, yards, centimeters, or meters. For inches, divide by 12; for yards, multiply by 3 to get feet; for centimeters, divide by 30.48; for meters, multiply by 3.280839895 to get feet. Keep more precision during the calculation and round the displayed result at the end.
If every dimension uses inches, another safe route is to multiply the three values in inches and divide by 1,728. When dimensions use different units, convert each one separately first so the factors are not mixed.
Worked inches-to-cubic-feet example
Consider a box measuring 30 in × 36 in × 25 in. These numbers are an arithmetic example, not a product recommendation.
| Step | Calculation | Result |
|---|---|---|
| Convert length | 30 ÷ 12 | 2.5 ft |
| Convert width | 36 ÷ 12 | 3 ft |
| Convert height | 25 ÷ 12 | 2.083333 ft |
| Multiply dimensions | 2.5 × 3 × 2.083333 | 15.625 ft³ |
| Convert to cubic yards | 15.625 ÷ 27 | 0.578704 yd³ |
The direct check is 30 × 36 × 25 = 27,000 in³; 27,000 ÷ 1,728 = 15.625 ft³. Entering these dimensions in the tool should show the same result before display rounding.
Calculate volume from area and depth
If you know a surface area and a uniform depth, multiply the area by the depth after putting both in compatible units. A 100 ft² area with a 0.5 ft depth has 100 × 0.5 = 50 ft³. A depth in inches must first be divided by 12 when the area is in square feet.
For an irregular area, split it into non-overlapping rectangles, triangles, or trapezoids, add their areas, and apply the depth to each zone. Keep zones with different depths separate; averaging them without a reason can change the volume. The Bulk Material Calculator is the better fit when the task is a material layer and you also need optional bags, supplier density, or price input.
Check the result and its limits
Review the original measurements, the unit conversion, and the cubic unit in the answer. Check whether you measured inside or outside dimensions and whether the entire space has the same depth. For a tank, room, excavation, or material layer with curves, slopes, voids, or changing dimensions, a rectangular estimate may not describe the actual volume.
The cubic-foot result does not tell you how much a material weighs or how many bags, boxes, or loads to buy. Product yield, density, compaction, moisture, and packaging must come from the product or supplier; do not substitute a universal assumption.
FAQs
How many cubic feet are in a cubic yard?
One cubic yard contains 27 cubic feet. Divide cubic feet by 27 to convert to cubic yards.
How do I calculate cubic feet from inches?
Multiply length × width × height in inches, then divide by 1,728. Alternatively, convert each dimension to feet before multiplying.
Can square feet be converted directly to cubic feet?
No. Square feet measure area and need a depth or height to become a volume. Multiply square feet by depth in feet for a uniform layer.
Does the result include material waste or compaction?
No. The result is geometric volume only. Add a project-specific allowance or product factor separately when a reliable plan or supplier specification provides one.