One input, two readings
How to read the square root result
Type a number into the value field and the result panel updates as you type. The large number is the principal square root, the non-negative root that the √ symbol denotes. A decimal answer is shown with ≈ because the display stops at 12 significant digits; an integer answer from a perfect square is shown without ≈ because nothing was rounded.
Below the headline are four checks. Exact radical gives the simplified form for a whole-number input. Rounded decimal repeats the decimal with its precision stated. Perfect square answers yes or no for whole numbers. Square check multiplies the displayed root by itself so you can see how close it lands to the input.
The page opens with 72, an editable example rather than a fixed value. Reset values returns to 72, and the current input is stored in the URL as an x parameter, so a shared link reopens the same value.
Square root formula and radical simplification
The square root of x is the number y whose square is x. For a non-negative x there is exactly one non-negative y, written √x, with y² = x. Both 3 and −3 square to 9, but √9 refers only to 3; the negative root is written −√9.
√x = y where y ≥ 0 and y² = x√(a² × b) = a × √b for a ≥ 0 and b ≥ 0Decimal displayrounded to 12 significant digitsInput range0 ≤ x ≤ 1,000,000,000Simplifying a radical means removing the largest perfect-square factor from under the root. Rewrite the number as a² × b, where b has no square factor greater than 1, then move a in front: √(a² × b) = a√b. The calculator performs this search only for whole numbers, because a decimal input has no unique integer radical form.
For example, 72 = 36 × 2 and 36 = 6², so √72 = √36 × √2 = 6√2. The radicand 2 is square-free: no whole number larger than 1 squares to a factor of 2. That is what makes 6√2 the simplified form rather than, say, 2√18.
Worked example: √72
The default input is 72. Factor it into a perfect square and a square-free remainder, pull the square root of the perfect square in front, then read the decimal.
| Factor 72 | 72 = 36 × 2 = 6² × 2 |
|---|---|
| Apply the product rule | √72 = √36 × √2 = 6√2 |
| Decimal value | 6 × 1.414213562373… = 8.485281374238… |
| Rounded display | ≈ 8.48528137424 (12 significant digits) |
| Square check | (8.48528137424)² ≈ 72 |
| Perfect square? | No; 8² = 64 and 9² = 81 |
The exact radical and the rounded decimal therefore describe the same value in two ways. If you square 6√2 symbolically, the result is 6² × 2 = 72 with no rounding error. If you square the rounded decimal, the last displayed digit can move the answer slightly above or below 72, which is why the check is labelled ≈.
A perfect square follows the same route with a square-free remainder of 1. For 144, the calculator shows √144 = 12, the decimal 12, and a perfect-square answer of Yes, because 12 × 12 = 144 exactly.
Perfect squares and estimation
Perfect squares are the whole numbers formed by squaring a whole number. They are useful anchors for estimating a root before or after using the calculator.
| Perfect square | Square root |
|---|---|
| 1 | 1 |
| 4 | 2 |
| 9 | 3 |
| 16 | 4 |
| 25 | 5 |
| 36 | 6 |
| 49 | 7 |
| 64 | 8 |
| 81 | 9 |
| 100 | 10 |
| 121 | 11 |
| 144 | 12 |
For a number between two perfect squares, its root sits between the two corresponding roots. 72 lies between 64 and 81, so √72 is between 8 and 9, closer to 8.5 because 72 is roughly halfway between 64 and 81. The calculator resolves that estimate to 8.485… and confirms the number is not a perfect square.
Perfect-square detection is a property of whole numbers. A decimal input such as 2.25 produces a decimal root but is not labelled a perfect square, because the input is not a whole number even though its root, 1.5, is a short decimal.
Precision, rounding, and limits
- Real roots only. The input must be 0 or greater. A negative number has no real square root, so the field reports an error instead of returning a complex number.
- Maximum input 1,000,000,000. Larger values are rejected so the whole-number radical search and the displayed precision stay predictable.
- Empty and non-numeric input. An empty field, letters, or a non-finite value are refused with a message that points back to the field.
- Exact radicals for whole numbers only. A decimal input gets a decimal root and a “not checked” perfect-square status; there is no exact radical cell for it.
- Decimal precision. The root is evaluated in double precision and rounded to 12 significant digits for display. That is enough for the stated input range, but it is not a symbolic equality — √72 is irrational and its decimal never ends.
- No units or expressions. The field takes a number, not a fraction, a cube root, or an expression such as √9 + √4.
When a result feeds another exact calculation, carry the radical forward. When it only needs a measurement-style reading, the 12-digit decimal is the practical form, and the square check shows how much display rounding moved the value.
Square root FAQs
Why is √72 written as 6√2 and also as 8.485…?
72 = 36 × 2, and √36 = 6, so √72 = 6√2. That radical is the exact value. The decimal 8.48528137424 is the same number rounded to 12 significant digits, which is why it carries a ≈ sign. Squaring 6√2 returns exactly 72, while squaring the rounded decimal lands just above or below it.
Is 72 a perfect square?
No. A perfect square is a whole number whose square root is also a whole number. 8² = 64 and 9² = 81, so √72 falls between 8 and 9 at about 8.485. The calculator reports the perfect-square status and the simplified radical separately so you can see both facts.
Can I take the square root of a decimal such as 2.25?
Yes. Enter 2.25 and the result shows 1.5 to the display precision. The exact radical cell is reserved for whole numbers, so a decimal input is reported as a decimal-only result rather than being labelled a perfect square, even when its root happens to be a short decimal.
How precise is the decimal square root?
The root is calculated in JavaScript double precision and rounded to 12 significant digits for display, with up to 1,000,000,000 as the input limit. Those displayed digits are a rounded reading, not an exact decimal: an irrational root such as √72 never terminates. Use the simplified radical for exact follow-on work.