Plan the quantity before you order
How much asphalt do I need?
Measure each paved section when thickness changes. Use the mix density and quote from your paving supplier.
Formula and unit assumptions
tons = area × thickness ÷ 12 × density ÷ 2,000 × (1 + allowance)All defaults are editable arithmetic examples. The calculator keeps the measured base quantity, allowance, package rounding, density, and price as separate steps so you can replace them with a product label or supplier quote.
Measure the job first
Measure each paved section when thickness changes. Use the mix density and quote from your paving supplier.
For irregular work, split the plan into simple sections and add the results. Do not use an area estimate to choose a structural thickness, drainage slope, reinforcement schedule, or local code requirement.
Worked example
For 1,000 ft² at 2 in and an editable 145 lb/ft³ density, the result is shown in tons before allowance and price.
| Base measurement | Shown in the calculator before allowance or rounding. |
|---|---|
| Purchase step | Coverage, density, yield, or price comes from your input. |
| Result | Display rounding happens after the calculation. |
What this estimate cannot decide
This does not design a pavement section, select a mix, calculate compaction, or include milling, base, tack coat, labor, taxes, or permits.
Asphalt Calculator FAQs
Why is density needed?
Area and thickness give volume; density turns volume into tons.
Does allowance include compaction?
It is a separate editable planning input; use the paving specification for compaction.
How much asphalt do I need for 1,000 square feet?
Enter the paved area, thickness, mix density, and allowance. For 1,000 ft² at 2 inches, the calculator converts the volume to tons using your density instead of assuming a universal weight.
How much does an asphalt driveway cost per square foot?
Multiply area by thickness and supplier density to estimate tons, then apply the current price per ton and separate fees. Labor, milling, base, taxes, and permits need their own inputs.