Plan the quantity before you order
How many battens fit on a wall?
Measure finished wall width and decide whether the layout starts and ends with a batten or a margin.
Formula and unit assumptions
battens = ceil((available width + gap) ÷ (batten width + gap))All defaults are editable arithmetic examples. The calculator keeps the measured base quantity, allowance, package rounding, density, and price as separate steps so you can replace them with a product label or supplier quote.
Measure the job first
Measure finished wall width and decide whether the layout starts and ends with a batten or a margin.
For irregular work, split the plan into simple sections and add the results. Do not use an area estimate to choose a structural thickness, drainage slope, reinforcement schedule, or local code requirement.
Worked example
A 20 ft wall with 3.5 in battens, 12 in gaps, and 3 in end margins returns the count and unfilled space.
| Base measurement | Shown in the calculator before allowance or rounding. |
|---|---|
| Purchase step | Coverage, density, yield, or price comes from your input. |
| Result | Display rounding happens after the calculation. |
What this estimate cannot decide
This layout aid does not choose board thickness, fastening, moisture movement, corner returns, or siding installation details.
Board and Batten Layout Calculator FAQs
Should I center the layout?
Use the unfilled-space result to adjust end margins or gap for a centered layout.
Are gaps edge to edge?
Yes. Enter the clear space between adjacent batten faces.
How do I space board and batten on a wall?
Choose the batten face, clear gap, and end margins, then compare the calculated count with the remaining unfilled width before you cut.