Construction · Masonry and hardscape

Brick & Paver Calculator

Estimate whole brick or paver pieces from the installable face area.

Editable example values

Change every product, density, coverage, and price input to match your plan or supplier label.

Project inputs

ft²
in
in
%
$
Calculated in your browser.
Estimate result

1,238 pieces

Estimated brick or paver count

Piece area0.2222 ft²
Base area250 ft²
Allowance10%
Material subtotal$928.5
Formulapieces = area × (1 + allowance) ÷ piece face areaJoint width, edge cuts, pattern, and pallet rounding can change the order quantity.

Plan the quantity before you order

How many bricks or pavers do I need?

Measure the installable area and use actual product face dimensions. Joint width, pattern, and edge cuts belong in the allowance.

Formula and unit assumptions

Calculation modelpieces = area × (1 + allowance) ÷ (length × width ÷ 144)

All defaults are editable arithmetic examples. The calculator keeps the measured base quantity, allowance, package rounding, density, and price as separate steps so you can replace them with a product label or supplier quote.

Measure the job first

Measure the installable area and use actual product face dimensions. Joint width, pattern, and edge cuts belong in the allowance.

For irregular work, split the plan into simple sections and add the results. Do not use an area estimate to choose a structural thickness, drainage slope, reinforcement schedule, or local code requirement.

Worked example

A 250 ft² area with 8 in × 4 in pieces has a 0.2222 ft² face area before allowance.

Base measurementShown in the calculator before allowance or rounding.
Purchase stepCoverage, density, yield, or price comes from your input.
ResultDisplay rounding happens after the calculation.

What this estimate cannot decide

This does not design the base, drainage, joint pattern, edge restraint, load rating, or structural wall.

Brick & Paver Calculator FAQs

Do paver joints change the count?

Yes. Pattern and joint width affect edge cuts and waste.

Can I use this for a brick wall?

Yes for face-area planning; openings and structural details need a separate takeoff.

How many bricks do I need for my area?

Divide the installable area by one brick face area, add the editable allowance for cuts and pattern, and round up to whole pieces or packages.