Construction · Materials

Concrete Calculator

Choose a slab, wall, footing, column, curb-and-gutter section, or stairs. Labeled plan and elevation diagrams show what each input measures; the estimate shows volume, bag quantity, and optional bag cost.

A flat rectangular pour such as a patio, shed base, or pad.

Measurement viewsIllustration only · not to scale
PLAN
ELEVATION
L12 ftW10 ftT4 in

Dimensions

Order planning
%
Editable input; no single allowance fits every pour.
QUIKRETE® Concrete Mix No. 1101; check your package.
$
Uses the bag count and price you enter.
Calculated in your browser.
Estimated order volume

1.63 yd³

Including your 10% allowance

Plan area120 ft²Base volume: 40 ft³ · 1.48 yd³
Extra allowance4 ft³0.15 yd³
Concrete bags74 bags0.6 ft³ per bag
Bagged material costAdd bag priceOptional estimate
Volume formula12 × 10 × 0.3333 × 1 = 40 ft³Length × width × depth × number of forms.

With allowance: 44 ft³ · 1.25 m³.

How much concrete do I need?

Use length × width × depth for a rectangular slab, wall, footing, or pad. A round column uses π × radius² × height. Multiply by the number of repeated forms, convert the dimensions to a common unit, and keep the base volume separate from any ordering allowance.

The calculator supports rectangular slabs or pads, straight walls and footings, round columns, curb-and-gutter sections, and solid stairs with equal steps. It reports cubic feet, cubic yards, cubic meters, package counts, and an optional bagged-material cost.

Measure the form before calculating

Choose the closest form and measure only the concrete section. For a slab or pad, enter length, width, and concrete thickness. For a wall, enter length, height, and thickness. For a straight footing, enter length, width, and depth. A round column uses its outside diameter and height.

Each dimension has its own unit selector, so feet, inches, yards, centimeters, and meters can be mixed. A slab that is 12 ft by 10 ft and 4 in thick uses 4 ÷ 12 ft for the thickness; compacted gravel and other base layers are not part of the concrete thickness.

If the pour has separate sections, calculate each section and add the base volumes. This keeps changes in thickness visible instead of treating an irregular pour as one block.

Curb-and-gutter and stair models

The curb-and-gutter option adds two rectangular cross-sections along the run: curb depth × curb height plus gutter width × flag thickness. It does not model a sloped pan, fillets, or a non-rectangular curb profile.

The stairs option treats equal steps as solid blocks and adds one rectangular top platform at the full stair height. It is a volume approximation, not a stair design or code check.

Worked example: a 12 ft × 10 ft slab

A 12 ft × 10 ft slab that is 4 in thick has 120 ft² of area. Convert the thickness to feet: 4 ÷ 12 = 1/3 ft. The base volume is 12 × 10 × 1/3 = 40 ft³, or 40 ÷ 27 = 1.48 yd³.

With an editable 10% planning allowance, the order volume is 44 ft³, or 1.63 yd³. If an 80 lb product yields 0.60 ft³ per bag, 44 ÷ 0.60 = 73.33, so the purchase quantity rounds up to 74 bags.

The 10% allowance and 0.60 ft³ yield are example inputs. Confirm the allowance, package yield, supplier increments, and delivery rules for the project.

Cubic feet to cubic yards

Ready-mix concrete is commonly quoted in cubic yards. One cubic yard is exactly 27 cubic feet, so divide the unrounded cubic-foot result by 27. One cubic meter is approximately 35.3147 cubic feet. Confirm the supplier's ordering unit and rounding rules before purchasing.

Bag yield and quantity

Bag count depends on the volume produced by the specific mix, not only the printed weight. Use the yield on the current package or technical data sheet; choose a custom yield when the product differs from the examples in the calculator. Bag count is rounded up to a whole bag. Price is optional and covers only the bagged material entered by the user.

Yield source: QUIKRETE Concrete Mix No. 1101 technical data sheet. Check the current package label before purchasing.

Bagged concrete or ready-mix

Use the adjusted cubic-yard result when discussing a ready-mix order and the package estimate when comparing bagged products. Suppliers may apply order increments, delivery minimums, or short-load charges. The allowance field is separate from base volume so the geometric result remains visible.

Estimate limitations

This calculator does not model bell-shaped footings, openings, sloped or curved profiles, fillets, varying thickness, reinforcement, soil, drainage, mix strength, structural design, permits, code compliance, labor, delivery, tax, or equipment. Follow the project drawings and confirm requirements with the relevant supplier, building department, or qualified professional.

Concrete calculator FAQs

How many cubic feet are in a cubic yard?

A cubic yard contains 27 cubic feet because 3 ft × 3 ft × 3 ft = 27 ft³.

Can I mix measurement units?

Yes. Choose a unit for each dimension. Every value is converted before the volume is calculated.

Does the calculator choose the concrete strength?

No. It estimates quantity. Use the mix and strength specified for the project and verify those requirements separately.

Why is yield used instead of bag weight?

Different products can produce different volumes at the same package weight. The package yield gives the direct volume-per-bag input needed for a quantity estimate.

Common concrete bag-count examples

These examples use a 10% allowance and an 80 lb bag yield of 0.60 cubic feet. Change the shape, dimensions, allowance, or package yield in the calculator for your project.

Common questionExample inputsCalculated answer
How many bags for a 10 ft × 10 ft slab?4 in thick · 10% allowance · 80 lb at 0.60 ft³36.67 ft³ to order · 62 bags
How many bags for a 12 ft × 10 ft slab?4 in thick · 10% allowance · 80 lb at 0.60 ft³44.00 ft³ to order · 74 bags
How many bags for a 10 ft × 10 ft wall?8 in thick · 10% allowance · 80 lb at 0.60 ft³73.33 ft³ to order · 123 bags
How many bags for a round column?12 in diameter × 8 ft high · 10% allowance6.91 ft³ to order · 12 bags
How many bags for a footing?6 ft × 2 ft × 8 in · 10% allowance8.80 ft³ to order · 15 bags

How many bags of concrete do I need for a slab?

Calculate the slab volume first, apply the editable allowance, then divide by the yield printed on the current bag. Round the result up to a whole bag count; bag weight alone does not tell you the volume.

Common concrete bag-count examples

These examples use a 10% allowance and an 80 lb bag yield of 0.60 cubic feet. Change the shape, dimensions, allowance, or package yield in the calculator for your project.

Common questionExample inputsCalculated answer
How many bags for a 10 ft × 10 ft slab?4 in thick · 10% allowance · 80 lb at 0.60 ft³36.67 ft³ to order · 62 bags
How many bags for a 12 ft × 10 ft slab?4 in thick · 10% allowance · 80 lb at 0.60 ft³44.00 ft³ to order · 74 bags
How many bags for a 10 ft × 10 ft wall?8 in thick · 10% allowance · 80 lb at 0.60 ft³73.33 ft³ to order · 123 bags
How many bags for a round column?12 in diameter × 8 ft high · 10% allowance6.91 ft³ to order · 12 bags
How many bags for a footing?6 ft × 2 ft × 8 in · 10% allowance8.80 ft³ to order · 15 bags