Construction · Drainage planning

French Drain Calculator

Subtract pipe displacement from trench volume, then estimate stone around the pipe.

Editable example values

Change every product, density, coverage, and price input to match your plan or supplier label.

Project inputs

ft
in
in
in
%
lb/ft³
Calculated in your browser.
Estimate result

48.033 ft³

Estimated stone volume around the pipe

Trench volume60 ft³
Pipe displacement3.491 ft³
Stone mass2.522 tons
Stone fill ratio85%
Formulastone = (trench volume − pipe volume) × stone fill ratioThis estimates material volume only; drainage design, slope, outlet, fabric, and local conditions need a site plan.

Plan the quantity before you order

How much stone do I need for a French drain?

Measure trench length, width, and depth. The fill ratio exposes void and installation assumptions instead of implying a universal quantity.

Formula and unit assumptions

Calculation modelstone = (trench volume − pipe volume) × stone fill ratio

All defaults are editable arithmetic examples. The calculator keeps the measured base quantity, allowance, package rounding, density, and price as separate steps so you can replace them with a product label or supplier quote.

Measure the job first

Measure trench length, width, and depth. The fill ratio exposes void and installation assumptions instead of implying a universal quantity.

For irregular work, split the plan into simple sections and add the results. Do not use an area estimate to choose a structural thickness, drainage slope, reinforcement schedule, or local code requirement.

Worked example

For a 40 ft trench 12 in wide and 18 in deep with a 4 in pipe, pipe displacement is removed before the stone ratio is applied.

Base measurementShown in the calculator before allowance or rounding.
Purchase stepCoverage, density, yield, or price comes from your input.
ResultDisplay rounding happens after the calculation.

What this estimate cannot decide

This is a material estimate only. Slope, outlet, filter fabric, cleanouts, groundwater, soil, and permits require a site plan.

French Drain Calculator FAQs

Does this include the pipe?

The pipe is used for displacement; the result is stone volume around it.

Why use a fill percentage?

A trench is not necessarily solid stone around the pipe; the input keeps the assumption visible.

How much gravel do I need for a French drain?

Measure the trench, subtract the pipe volume, and use the stone-fill ratio for the portion actually filled with aggregate. Confirm slope, fabric, outlet, and local requirements separately.