12 inches in every foot
How do you convert inches to feet?
Divide inches by 12 to get feet. For example, 36 inches ÷ 12 = 3 feet. The calculator keeps the decimal result, then breaks it into whole feet and remaining inches so the same measurement can be used in a plan, spreadsheet, or tape-measure workflow.
Inches-to-feet formula
The relationship is exact for the international foot used by modern U.S. customary and metric conversion references:
feet = inches ÷ 12inches = feet × 121 ft = 12 inUse the decimal feet result for multiplication, area, or volume calculations. A fractional display is a rounded reading for a ruler or tape and should not replace the exact decimal in a later calculation.
Unit reference: NIST Guide to the SI conversion factors.
Read feet and inches on a tape
To split a decimal foot measurement, keep the whole-foot part and multiply the fractional part by 12. For 7.5 feet, the whole-foot part is 7 and the remainder is 0.5 × 12 = 6 inches, so the construction reading is 7 ft 6 in.
For an inches input, divide by 12 first and apply the same split. A value of 89 inches is 7.4166667 feet, or 7 ft 5 in exactly.
Worked example: 47.5 inches
Suppose a trim piece measures 47.5 inches:
| Decimal feet | 47.5 ÷ 12 = 3.958333 ft |
|---|---|
| Whole feet | 3 ft |
| Remaining inches | 0.958333 × 12 = 11.5 in |
| Construction reading | 3 ft 11 1/2 in |
Choose the fractional precision that matches the measuring tool or product specification. The displayed fraction is rounded only for the practical reading.
Fractional-inch measurements
Many construction measurements are recorded to the nearest 1/16, 1/8, 1/4, or 1/2 inch. This calculator lets you choose that display precision. The conversion itself remains based on the value you entered, so rounding a tape reading does not silently change the decimal result.
If you are cutting or ordering material, compare the rounded reading with the manufacturer's stated tolerance and your actual measurement. A calculator cannot decide whether a cut should be rounded up for a joint, gap, or installation detail.
Limits of the conversion
This page converts length units. It does not calculate area, volume, scale drawings, material quantities, or a required construction tolerance. Use the converted length as an input to a shape or material calculator when a project needs a second calculation.
Inches to feet calculator FAQs
How many feet are in 60 inches?
60 inches ÷ 12 = 5 feet.
How do I convert feet to inches?
Multiply feet by 12. For example, 7.5 feet × 12 = 90 inches.
How do I convert 47.5 inches to feet and inches?
47.5 inches equals 3.958333 decimal feet, or 3 ft 11 1/2 in.
Should I use decimal feet or feet and inches?
Use decimal feet for formulas and spreadsheets. Use feet and inches when communicating a tape measurement or a product dimension stated that way.
Does the fraction setting change the exact result?
No. It changes only the practical feet-and-inches display. The decimal feet and total inches continue to use your entered value.