Concrete & Masonry · Concrete & Materials
How to Calculate Concrete Weight from Volume and Density
Concrete weight depends on volume and density. Convert the volume to cubic feet, enter the mix density, and keep the mass estimate separate from structural and delivery decisions.
To calculate concrete weight, convert the volume to cubic feet, multiply by the density in pounds per cubic foot, then divide pounds by 2,000 for U.S. short tons.
The guide is paired with the Concrete Weight Calculator. Use the calculator when you have measurements; use this page to decide what to measure, check the unit basis, and understand what the result does not claim.
The quick answer
To calculate concrete weight, convert the volume to cubic feet, multiply by the density in pounds per cubic foot, then divide pounds by 2,000 for U.S. short tons. Use the result as a mass estimate for load planning; it does not choose a mix density or approve a delivery.
Use the formula
weight (lb) = volume (ft³) × density (lb/ft³)
short tons = pounds ÷ 2,000
kilograms = pounds × 0.45359237
Keep pounds, short tons, and kilograms as separate unit outputs so a transport limit is compared with the matching unit.
Measure and choose the input
Start with the finished concrete volume, not the volume of the empty form plus a separate base layer. The Concrete Weight Calculator accepts cubic feet, cubic yards, or cubic meters and converts them before applying density. A cubic yard is 27 cubic feet, and a cubic meter is about 35.3147 cubic feet.
For a slab, footing, or batch, add non-overlapping volume sections before converting. Record the mix density source and its units beside the volume.
Worked example
Suppose a pour is 5 yd³ and the supplier lists a density of 145 lb/ft³. Convert volume first: 5 × 27 = 135 ft³. Then 135 × 145 = 19,575 lb, or 9.7875 short tons. The displayed result can be rounded for reading, but keep the unrounded mass for a load check.
This example uses an entered supplier density to show the arithmetic; a different mix density changes the result.
Common mistakes
Do not use the bag weight as the finished concrete density. A 60-lb bag becomes a larger volume after mixing, and the yield is product-specific. Also avoid calling a short ton a metric tonne: a U.S. short ton is 2,000 lb, while a metric tonne is 1,000 kg.
Divide the calculated pounds by the entered density to recover the original cubic-foot volume.
What this estimate leaves out
Density varies with aggregate, entrained air, moisture, and mix design. This guide does not choose slab thickness, calculate reinforcement, determine truck capacity, or provide a structural or delivery approval.
FAQs
Is concrete weight the same for every mix?
No. Lightweight, normal-weight, and heavyweight mixes have different densities. Use a current product or supplier value.
How much does one cubic yard weigh?
Multiply 27 ft³ by the density. At 145 lb/ft³, the arithmetic example is 3,915 lb, but another mix may be different.
Can I convert concrete weight back to volume?
Yes, if the mass and density are known: volume = weight ÷ density. Keep the density units compatible.