12 guides · 2 calculators

Concrete Guides: Slabs, Footings, Columns, Stairs, and Bag Counts

A concrete estimate starts with the shape of the pour. A slab, a rectangular footing, a round column, a set of solid stairs, and a fence post all use different measurements, and the bag count adds a product yield on top of the geometric volume.

These guides show the measurement and checking steps behind the Concrete Calculator. Use the calculator when you already have dimensions; use a guide when you need to measure a shape, understand why the bag count differs, or see what the estimate leaves out. Thickness, footing size, and reinforcement are design decisions, not outputs of these pages.

Start here

  1. Choose the shape

    Slab, rectangular footing, round column, solid stairs, or fence post. The shape decides which dimensions matter.

  2. Measure in one unit system

    Convert thickness or depth to feet before multiplying. Keep the measured net volume separate from any ordering allowance.

  3. Calculate the net volume

    Use the Concrete Calculator to get cubic feet and cubic yards from the dimensions you measured.

  4. Convert to bags or ready-mix

    Use the yield printed on the bag, or compare the volume with a ready-mix quote. Bag weight alone does not determine finished volume.

Calculators for this task

Start with the main calculator when you already have measurements. The related tools cover the conversion or order step that follows.

Slabs and footings

Start with the poured shape and its thickness. Both guides keep the net volume separate from the ordering allowance.

Columns and stairs

A round column and a form tube are both cylinders; the stairs guide covers equal solid steps plus a top platform, not a thin sloped slab.

Bags and fence posts

Bag count depends on the product yield. A fence-post estimate also deducts the post itself from the hole volume.

What changes the answer

  • Net volume is not an order. Add a separately chosen allowance for spillage, uneven subgrade, or a supplier's minimum.
  • Bag yield is product-specific. Two bags of the same weight can produce different finished volumes.
  • A fence-post hole is a cylinder minus the post; a round-column form is a cylinder without that deduction.
  • The stairs model uses equal solid steps and a top platform. It does not cover a thin sloped slab or structural reinforcement.
  • Slab thickness, footing dimensions, and rebar are inputs or design choices, not recommendations.

Questions about these guides

Should I start with the calculator or a guide?

If you have dimensions, start with the Concrete Calculator. If you need to measure a shape or check a bag count, start with the matching guide.

Does the calculator include waste?

It returns net volume. Any allowance is a separate input you choose; the guides show where that extra goes and why it is not a universal percentage.

Why is my bag count different from the volume?

Bag yield varies by mix. Use the yield on the product you are buying, not a rule based on bag weight alone.

Can I use these for a ready-mix order?

The volume is a planning figure. Confirm the supplier's minimum, yield, delivery, and site conditions; these pages do not quote a delivery.